Use a Gemma M0 and a couple of LEDs to make this Princess Peach / Bowsette inspired crown! Use Circuit Python to fade the 10mm LEDs inside the translucent filament to illuminate this magical mushroom inspired crown.

learn guide

https://learn.adafruit.com/bowsette/

GEMMA Crown

https://learn.adafruit.com/bowsette/overview

GEMMA M0

https://www.adafruit.com/product/3501

Ninjaflex Gold TPU

https://www.adafruit.com/product/2446

150mAh lipo battery

https://www.adafruit.com/product/1317

10mm LEDs

https://www.adafruit.com/product/845

Monoprice Inventor II 3D Printer

https://www.adafruit.com/product/3897

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------

LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

-----------------------------------------