Design Vault

Design Vault

Download on the App Store

Design Vault episodes

  • The Z House with Shane Neufeld

    In this episode of Design Vault, Doug speaks with Shane Neufeld, registered architect at Light and Air Architecture in Brooklyn, New York.

    Visit glengery.com/design-vault to see photos and additional information as you listen along.

    The Z house, named for the shape of its stair is a renovation, providing a unique model for the urban domestic experience. At the Project Center is a new switchback stair that integrates the house vertically and horizontally, carving out the existing structure in order to shape dynamic sightlines that connect inhabitants in new ways.

    The stairs drama is heightened by the placement of large windows punctuating the rear facade. These allow the vertical space to open to the exterior directing views from the stair through the house and to the yard beyond. Descending from the rear of the parlor floor is a smaller stair slotted between a steel guardrail and oak millwork. This connects the living room to the new horizontal additions below.

    Here, the added square footage accommodates the kitchen and dining room in a single dramatic double height space that visually unites the rear yard and the parlor floor above. A green roof located above the garden level helps to buffer sightlines and cultivates a natural intimacy for the residents inside. 

    26 min
  • 650 Park Ave with Christa Waring

    In this episode of Design Vault, Doug speaks with Christa Waring, AIA, LEED-AP, CPHD, Principal at CTA Architects in New York, New York.

    Visit glengery.com/design-vault to see photos and additional information as you listen along.

    650 Park Avenue is located in the Upper East Side Historic District, built in 1963 and designed by Emery Roth and Sons Architects. It's a 21 story apartment building with a white glazed brick facade and setbacks above the 16th floor. The base of the building maintains the building line of Park Avenue.

    Recent facade examinations revealed a deficiency in the wall tie system that connects the face masonry to the backup concrete block masonry. CTA designed a program of facade repairs that include face masonry pinning in addition to the restoration of all shelf angles across the facades.

    The original construction features have finished glazed edge over all the window lintels, which has an impressive impact on the aesthetic of the building. Thus, the project entails an extensive masonry rebuild where matching the existing brick is of paramount importance.

    30 min
  • Tudor House with Lorne Rose

    In this episode of Design Vault, Doug speaks with Lorne Rose, architect at Lorne Rose Architect in Toronto, Ontario.

    Visit glengery.com/design-vault to see photos and additional information as you listen along.

    Today, we're going to talk about Lauren's Tudor home in Toronto. The neighborhood has a number of esthetically diverse architectural gems from the turn of the century, including a traditional Tudor that served as inspiration. Lauren's Tudor home features a variety of signature Tudor brick patterns from diagonal and herringbone to basket weave.

    The traditional half timber board work has been replaced with stone and a carved stone belt course that runs across the front facade, separates stone veneer at the base, a steep gable stance across all facades, giving it order and magnifying the Tudor style. The roof is cedar shingle and the overhangs are traditional. The rear of the house has a spacious covered porch with wonderful wood.

    Details, and the opposite side features a carved stone entry and a large wood and glass front door. The front landscape is organized, yet slightly whimsical, with a U-shaped drive. The backyard, in contrast, has an oval shaped lawn area surrounded by garden walls, apple trees and a vegetable garden. 

    28 min
  • Smart Design Studio with William Smart

    In this episode of Design Vault, Doug speaks with William Smart, founder and creative director at Smart Design Studio in Sydney, Australia.

    Visit glengery.com/design-vault to see photos and additional information as you listen along.

    The new Smart Design Studio building is an innovative, sustainable and sculptural building with both new and renovated facades that sit within an inner city conservation area of brick warehouses. The design relates to the industrial buildings from the precinct.

    While it makes a departure with a modern facade of tiles, galvanized sheeting, steel frame windows and dynamic forms of curling and curving brick. Structurally, a large portion of the building feels industrial with precast concrete slabs, structural brick roof vaults and steel. Environmentally. The naturally lit and ventilated studio collects its own water and generates its own power, creating a carbon neutral building.

    In addition, large full length clear story windows enable natural light to enter the single industrial scale workspace. The Sawtooth roof trusses and a portion of the facades were retained with the exception of the offices on the western street frontage. That's where a narrow, highly designed apartment runs atop the length of the building. The apartment features four self-supporting offset brick, cat and airy vaults that allow light into the apartment.

    57 min
  • 50 Nevins Street with John Woelfling

    In this episode of Design Vault, Doug speaks with John Woelfling, Principal at Dattner Architects at in New York City.

    Visit glengery.com/design-vault to see photos and additional information as you listen along.

    Located in downtown Brooklyn, 50 Nevins Street appears to be two buildings in one. The approach was to reinvigorate a century-old building through gut renovation and addition, which provides affordable housing, housing for formerly homeless individuals, and mental health services.

    The historic site, with its new ten-story addition, features 129 new apartments. The building was originally designed by famed Brooklyn architect Frank Freeman, opened in 1913 as a YWCA. In the early 1930s an extensive portion of the building was shaved off to enlarge Schermerhorn Street and make way for the subway line. That adjustment resulted in an imbalance to the original Colonial Revival building.

    The new coupled design ascribes value to the existing building and helps restore the balance it had lost. The existing red brick building remains shorter with a classical cornice. The new building sits slightly taller, flush and adjacent with a recessed connector which visually separates the architecture. The contrast in masonry color, dark connector and stylistic changes to the forms and facades set the two buildings apart esthetically, though clearly they're co-combined. 

    36 min
  • 1515 Surf Avenue with Jay Valgora

    In this episode of Design Vault, Doug speaks with Jay Valgora, Founder and Principal at Studio V in New York City, New York.

    Visit glengery.com/design-vault to see photos and additional information as you listen along.

    1515 Surf Avenue is a two tower, 26 and 16 story residential building complex in Coney Island, Brooklyn, designed by Studio V Architecture. This street corner project will span 470,000 square feet and yield 461 units, 139 designated for affordable housing and 11,000 square feet of ground floor retail.

    The building facade is variegated white to cream colored brick, with the main building podium facing Surf Avenue, featuring a soaring ground floor elevation with several diagonal columns. Its sloped roofline is further defined by a stepped series of wooden platforms the design team calls the vertical boardwalk. The building features curved glass lined balconies and amenity deck heated pool and green roof.

    Residents have panoramic views of Coney Island Amusement Park and the Atlantic Ocean. The total outdoor space will span over 20,000 square feet. The building includes a fitness center, lounges, co-working spaces, indoor basketball court, handball court and accessory off street parking. When completed in 2024, the property will be the largest geothermal heated and cooled building in New York City.

    35 min
  • Tammany / 44 Union Square with Todd Poisson

    In this episode of Design Vault, Doug speaks with Todd Poisson, Partner at BKSK Architects in New York City. They discuss Tammany / 44 Union Square.

    Visit glengery.com/design-vault to see photos and additional information as you listen along.

    44 Union Square sits at the northeast corner of Union Square Park in Manhattan. The project includes a remarkable contemporary steel and glass dome addition to the storied landmark building on Union Square's northeast corner for Redding International Ink.

    The new building expands the usable square footage of the historic building and adds an iconic anchor to Union Square. The building's former life was as the last headquarters for the political machine, Tammany Hall, an American organization founded in 1786, famous for controlling New York City and state politics for a time.

    The restoration and expansion of the building includes preserving two facades, new bronze storefronts in the likeness of the original 1928 design and a three-story rooftop addition. This wild steel and glass building cap is composed of a self-supporting free form shell grid dome atop a reconstructed hipped roof with gray terracotta sunshades.

    36 min
  • PA State Archives with Paul Neuhaus

    In this episode of Design Vault, Doug speaks with Paul Neuhaus, AIA, LEED AP, Senior designer at HGA.

    Visit glengery.com/design-vault to see photos and additional information as you listen along.

    The new Pennsylvania State Archives Facility collects and preserves valuable paper documents while making them available to the public for viewing and research. The building is a state-of-the-art archival facility with an enhanced building envelope and HVAC system for the optimal environment to preserve historical paper documents.

    The street façade features a linear, steel framed louver structure which surrounds a two-story high glass enclosed pavilion. The pavilion is connected to the main building, which accommodates the two public research rooms and staff spaces. While much of the building requires a windowless approach. A wide assortment of colored Norman size bricks were used to give the façade a varied and playful appearance.

    The building used 350,000 brick equivalents in a blend of five different glazed brick colors. The building is three city blocks in size on three acres of land. The total storage area on three floors is 50,000 square feet and includes oversized, cool, cold, secure, and digital archives.

    29 min
  • Gansevoort Row with David Kubik

    In this episode of Design Vault, Doug speaks with David Kubik, AIA, Partner at BKSK Architects in New York City, New York.

    Visit glengery.com/design-vault to see photos and additional information as you listen along.

    BKSK Architects made its imprint on the Gansevoort Market Historic District in New York City with a collection of landmark approvals. The redevelopment of a full block of tattered, low rise commercial buildings near the High Line.

    Through careful analysis, BKSK made a strong rationale for taller building heights and some new construction along portions of the block. The new development project has a roster of luxury retailers, commercial and office space. The row buildings include existing facades, along with a creative variety of contemporary versions. Interestingly, each new building of various sizes features a unique blend of colors and patterns of brick.

    The street facades maintain a turn of the century aesthetic with traditional elements and details, while employing modern windows and expansive metal awnings.

    36 min
  • Henhawk House with Sussan Lari

    In this episode of Design Vault, Doug speaks with Sussan Lari, AIA, founder of Sussan Lari Architect, P.C. in Long Island, New York

    Visit glengery.com/design-vault to see photos and additional information as you listen along.

    The Henhawk House is a renovation, and major expansion of an existing 4,100 square foot residence. The new home is approximately 13,300 square feet.

    The home features steeply pitched slate roofs, multiple gables of varying size, light red brick facades and half-timbered elevations with stucco infill and light gray wood. The homemade brick is highly detailed, with soldier, diagonal and herringbone coursing.

    The design also features tall, narrow windows, elliptical masonry archways and red copper gable finials, all of which reference early English domestic architecture and of course, the Tudor style. Although the exterior of the house is a traditional design language, the inside is completely open, functional, expansive, bright and modern.

    27 min

About Design Vault

From the publisher's feed

From historic homes to contemporary architecture, brick is one of the most popular design elements around the world. However, it's easy to get the impression that creative use of brick can be limited. This podcast shares the inspiring stories of architectural leaders and how ideas of the past inspired ingenious designs of today. Each episode will stretch the imagination and fuel your next innovative solution with brick.