Making Awesome, supported by 3D Musketeers is a podcast surrounding the trials and tribulations of entrepreneurship, product development, inventing, patenting, and protections. We will also deep dive into technologies to help you get to these steps like 3D Printing, CNC Milling, and Injection Molding.

In this episode we review the NEW branding for this podcast and Making Awesome! Tomas put a TON of time and energy in here and you will get to hear all the ins and outs of the process! We are extremely happy with the work Tomas has accomplished! But, we need your help! We cannot decide which logo we should use for 3D Musketeers. Keep an eye out for the poll link! It will only be live for a few weeks then we will link to the winner!

On Facebook:  https://www.facebook.com/3DMusketeers/posts/2761711367373900 

On Instagram:  https://www.instagram.com/p/CHiR013hA_X

Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

Watch on Youtube:  https://youtu.be/K4RhU7Bmuos

Making Awesome, supported by 3D Musketeers is a podcast surrounding the trials and tribulations of entrepreneurship, product development, inventing, patenting, and protections. We will also deep dive into technologies to help you get to these steps like 3D Printing, CNC Milling, and Injection Molding.       

In this episode we talk about a topic we should have covered a bit ago, What actually is 3D printing. Tomas, Tad, and Grant all talk about their experiences and knowledge within the industry. A great one full of informational nuggets!   

Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

Making Awesome, supported by 3D Musketeers is a podcast surrounding the trials and tribulations of entrepreneurship, product development, inventing, patenting, and protections. We will also deep dive into technologies to help you get to these steps like 3D Printing, CNC Milling, and Injection Molding.       

In this episode we have back Tomas, a branding expert, to talk about why branding matters so much and why ours actually sucks, a lot! This has some strong language, so young viewers be warned. Great information, tips, tricks, and good times all around. Bit shorter than last time, but great content none the less!   

Youtube link:  https://www.youtube.com/watch?v=kCPqwuFHsbY

Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

Making Awesome, supported by 3D Musketeers is a podcast surrounding the trials and tribulations of entrepreneurship, product development, inventing, patenting, and protections. We will also deep dive into technologies to help you get to these steps like 3D Printing, CNC Milling, and Injection Molding.       

In this episode we welcome Tomas, a branding expert, to talk about why branding matters so much and why ours actually sucks, a lot! This has some strong language, so young viewers be warned. Great information, tips, tricks, and good times all around. This was one of our favorite to record to date.  

Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

Making Awesome, supported by 3D Musketeers is a podcast surrounding the trials and tribulations of entrepreneurship, product development, inventing, patenting, and protections. We will also deep dive into technologies to help you get to these steps like 3D Printing, CNC Milling, and Injection Molding.      

 In this episode we talk about the the Benefits of 3D Printing. This tech has uses all over, many you may not know, take a listen and find out more!   

Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

Every now and again, we just get to talking, sometimes we remember to hit record as well. In this BONUS episode you get to listen to some of the back and forth between Grant and Tad regarding Tad's new Prusa MK3s 3D Printer. Check it out!

Making Awesome, supported by 3D Musketeers is a podcast surrounding the trials and tribulations of entrepreneurship, product development, inventing, patenting, and protections. We will also deep dive into technologies to help you get to these steps like 3D Printing, CNC Milling, and Injection Molding.       

Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

Watch this episode on Youtube:  https://www.youtube.com/watch?v=GVzzBaFjYv8

Making Awesome, supported by 3D Musketeers is a podcast surrounding the trials and tribulations of entrepreneurship, product development, inventing, patenting, and protections. We will also deep dive into technologies to help you get to these steps like 3D Printing, CNC Milling, and Injection Molding.       

In this episode we talk about the the cost of 3D Printing. A bit of an odd subject as machines can cost as low as a few hundred, but then well up into the millions. Grant and Tad lay it all out for you, explaining why things are the way they are.   

Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

Making Awesome, supported by 3D Musketeers is a podcast surrounding the trials and tribulations of entrepreneurship, product development, inventing, patenting, and protections. We will also deep dive into technologies to help you get to these steps like 3D Printing, CNC Milling, and Injection Molding.       

In this episode we talk about the most common FDM 3D printing materials: PLA, PETG, and ABS!  This is a short one, but packed with some decent information we hope! Have something to add, let us know in the comments or contact us below!  

Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com/podcast and someone will get you set up to be a guest!

Making Awesome, supported by 3D Musketeers is a podcast surrounding the trials and tribulations of entrepreneurship, product development, inventing, patenting, and protections. We will also deep dive into technologies to help you get to these steps like 3D Printing, CNC Milling, and Injection Molding.     

In this episode we talk about the history of CAD, why it matters, and how it changed the industry! 

Referenced links: 

https://partsolutions.com/60-years-of-cad-infographic-the-history-of-cad-since-1957/

Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com and someone will get you set up to be a guest!

Making Awesome, supported by 3D Musketeers is a podcast surrounding the trials and tribulations of entrepreneurship, product development, inventing, patenting, and protections. We will also deep dive into technologies to help you get to these steps like 3D Printing, CNC Milling, and Injection Molding. 

In this episode we talk about the differences, benefits, and drawbacks to 3D Printing vs. Injection molding. Come, sit, enjoy, and continue making awesome! Video:  https://youtu.be/BZpFxJnwo2M

Do you have an idea you want to get off the ground? Reach out to the Making Awesome Podcast through https://3DMusketeers.com and someone will get you set up to be a guest!