Stemiverse Podcast

Stemiverse Podcast

By Tech ExplorationsTechnologyEducationHow ToDesign
Download on the App Store

Stemiverse Podcast episodes

  • Richard Park on the experiences of a Teacher-Maker (part 2)
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris (that’s me!) talks with Richard Park.
    Richard has been teaching full time for twenty years. He currently teaches college-level Network Engineering and is creating an “IoT Explorations” course for the coming school year.
    Richard also taught Secondary Technology Education, concurrently, for eleven years. In these venues, the topics included coding, operating systems, electronics, and multimedia in addition to networking.
    Prior to his full-time teaching career, Richard was a Cisco Systems Network Academy Area Manager, Apple Computer Systems Engineer, Texas Instruments Technical Instructor, and an IBM Mainframe Systems Field Engineer.
    At Apple Computer, he designed and implemented the technology infrastructure for the Apple Market Center, a predecessor to today’s Apple Stores, and co-authored the “Apple ][ Primer”, Apple’s first classroom teacher training manual.
    Richard holds AAS, BS, and MS degrees in Electronics Technology, Radio and Television Journalism, and Education from Southern Illinois University, and Texas A&M University.
    In my conversation with Richard, we touched on a wide array of topics drawing mostly from his vast experience. He worked at Apple Computer for 20 years, at a time where networks were open and unencrypted, and witnessed first hand Apple’s foray into education, and he wrote the Apple ][ Primer, one of the first programming guides for teachers. This discussion reminded me of my first computer, an Apple //e with 128KBytes of RAM.
    Richard was one of the first users of Visicalc, one of the first visual spreadsheet programs for the Apple ][ and defined much of how modern spreadsheets work. This knowledge was very useful when he worked at Texas Instruments and essentially revolutionized job costing.
    We discussed Richard’s work at the CISCO Academy where he teaches Network Engineering and the course he is developing at the moment, on IoT Fundamentals. In this course that Richard is designing, he combines a Raspberry Pi and Arduino to teach IoT concepts by gradually building an IoT application.
    We also had a look at Richard’s adaptation of the Raspberry Pi Full Stack application, which is one of my favorite moments of the conversation.
    We talked about Radio Shack, Bill Nye the Science Guy, Mr. Wizard, breadboarding, and, so much more.
    I am sure you will enjoy this conversation.
    This is Tech Explorations Podcast episode 5 part 2.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:34] Richard approach to teaching complicated topics and to starting a new project that has a lot of unknowns in it
    [0:05:49] The difference between a mentor and a coach, and the role of the mentor
    [0:09:31] What got Richard into electronics and where did Richard get parts during those earlier days?
    [0:16:18] Equipping the students with kits
    [0:19:53] The responsibility of the teacher is to convert information noise into an ordered curriculum
    [0:21:24] Don Herbert, Watch Mr. Wizard
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris (that’s me!) talks with Richard Park.
    Richard has been teaching full time for twenty years. He currently teaches college-level Network Engineering and is creating an “IoT Explorations” course for the coming school year.
    Richard also taught Secondary Technology Education, concurrently, for eleven years. In these venues, the topics included coding, operating systems, electronics, and multimedia in addition to networking.
    Prior to his full-time teaching career, Richard was a Cisco Systems Network Academy Area Manager, Apple Computer Systems Engineer, Texas Instruments Technical Instructor, and an IBM Mai
    27 min
  • Richard Park on the experiences of a Teacher-Maker (part 1)
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris (that’s me!) talks with Richard Park.
    Richard has been teaching full time for twenty years. He currently teaches college-level Network Engineering and is creating an “IoT Explorations” course for the coming school year.
    Richard also taught Secondary Technology Education, concurrently, for eleven years. In these venues, the topics included coding, operating systems, electronics, and multimedia in addition to networking.
    Prior to his full-time teaching career, Richard was a Cisco Systems Network Academy Area Manager, Apple Computer Systems Engineer, Texas Instruments Technical Instructor, and an IBM Mainframe Systems Field Engineer.
    At Apple Computer, he designed and implemented the technology infrastructure for the Apple Market Center, a predecessor to today’s Apple Stores, and co-authored the “Apple ][ Primer”, Apple’s first classroom teacher training manual.
    Richard holds AAS, BS, and MS degrees in Electronics Technology, Radio and Television Journalism, and Education from Southern Illinois University, and Texas A&M University.
    In my conversation with Richard, we touched on a wide array of topics drawing mostly from his vast experience. He worked at Apple Computer for 20 years, at a time where networks were open and unencrypted, and witnessed first hand Apple’s foray into education, and he wrote the Apple ][ Primer, one of the first programming guides for teachers. This discussion reminded me of my first computer, an Apple //e with 128KBytes of RAM.
    Richard was one of the first users of Visicalc, one of the first visual spreadsheet programs for the Apple ][ and defined much of how modern spreadsheets work. This knowledge was very useful when he worked at Texas Instruments and essentially revolutionized job costing.
    We discussed Richard’s work at the CISCO Academy where he teaches Network Engineering and the course he is developing at the moment, on IoT Fundamentals. In this course that Richard is designing, he combines a Raspberry Pi and Arduino to teach IoT concepts by gradually building an IoT application.
    We also had a look at Richard’s adaptation of the Raspberry Pi Full Stack application, which is one of my favorite moments of the conversation.
    We talked about Radio Shack, Bill Nye the Science Guy, Mr. Wizard, breadboarding, and, so much more.
    I am sure you will enjoy this conversation.
    This is Tech Explorations Podcast episode 5 part 1.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:00] Introducing Richard Park
    [0:04:10] Richard talks about his background as an information technology teacher as well as a maker
    [0:09:03] VisiCalc, the first spreadsheet computer program for personal computers
    [0:18:11] Richard’s personal and teaching projects on the Raspberry Pi
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris (that’s me!) talks with Richard Park.
    Richard has been teaching full time for twenty years. He currently teaches college-level Network Engineering and is creating an “IoT Explorations” course for the coming school year.
    Richard also taught Secondary Technology Education, concurrently, for eleven years. In these venues, the topics included coding, operating systems, electronics, and multimedia in addition to networking.
    Prior to his full-time teaching career, Richard was a Cisco Systems Network Academy Area Manager, Apple Computer Systems Engineer, Texas Instruments Technical Instructor, and an IBM Mainframe Systems Field Engineer.
    At Apple Computer, he designed and implemented the technology infrastructure for the Apple Market Center, a predecessor to today’s Apple Stores, and co-authored the “
    31 min
  • Martin Zwigl on being a software developer making physical things (part 2)
    The full video for this interview is available, please check it out.
    In this episode, Dr. Peter Dalmaris (that’s me!) talks with Martin Zwigl.
    Martin attended a technical school for mechanical engineering in Austria. However, he never worked as an engineer and instead, he became a Software Developer.
    Earlier in life, Martin built many remote-controlled cars and planes. As a software developer, most of his work with electronics involves a lot of coding, which he considers an essential part of “making”.
    Martin is relatively new to the world of the Arduino, but he has already produced several fun projects.
    In our conversation, we explored many of these projects, and also looked at some very ambitious ideas for future projects.
    In one of his projects, Martin used all of his skills, electronics, coding, and art, to build Light Gary, a colorful creature with a clock and a head that lights up.
    In another project, with the help of Dario, a friend and electronics expert, he built a gadget that reminds him to drink his beer. The beer gadget consists of just 4 parts: a buzzer, an accelerometer, a clock, and a diode.
    One of his current projects is Virtual City Windows, a system that consists of large high-definition video walls installed in cities around the world. These systems enable two-way communications between any two cities, giving people a view into life around the world.
    Martin is also very much into virtual and augmented reality, and we spent some time looking into this exciting technology, including a headset that Martin is building.
    I am sure you will enjoy this conversation.
    This is Tech Explorations Podcast episode 4 part 2.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:36] Martin discusses his interest in the Bitcoin
    [0:09:10] Virtual City Windows: GitHub Source Code
    [0:16:54] Martin’s plans for the future
    [0:24:51] Leap Motion
    [0:27:44] Martin’s Contact Info
    The full video for this interview is available, please check it out.
    In this episode, Dr. Peter Dalmaris (that’s me!) talks with Martin Zwigl.
    Martin attended a technical school for mechanical engineering in Austria. However, he never worked as an engineer and instead, he became a Software Developer.
    Earlier in life, Martin built many remote-controlled cars and planes. As a software developer, most of his work with electronics involves a lot of coding, which he considers an essential part of “making”.
    Martin is relatively new to the world of the Arduino, but he has already produced several fun projects.
    In our conversation, we explored many of these projects, and also looked at some very ambitious ideas for future projects.
    In one of his projects, Martin used all of his skills, electronics, coding, and art, to build Light Gary, a colorful creature with a clock and a head that lights up.
    In another project, with the help of Dario, a friend and electronics expert, he built a gadget that reminds him to drink his beer. The beer gadget consists of just 4 parts: a buzzer, an accelerometer, a clock, and a diode.
    One of his current projects is Virtual City Windows, a system that consists of large high-definition video walls installed in cities around the world. These systems enable two-way communications between any two cities, giving people a view into life around the world.
    Martin is also very much into virtual and augmented reality, and we spent some time looking into this exciting technology, including a headset that Martin is building.
    I am sure you will enjoy this conversation.
    This is Tech Explorations Podcast episode 4 part 2.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students,
    30 min
  • Martin Zwigl on being a software developer making physical things (part 1)
    The full video for this interview is available, please check it out.
    In this episode, Dr. Peter Dalmaris (that’s me!) talks with Martin Zwigl.
    Martin attended a technical school for mechanical engineering in Austria. However, he never worked as an engineer and instead, he became a Software Developer.
    Earlier in life, Martin built many remote-controlled cars and planes. As a software developer, most of his work with electronics involves a lot of coding, which he considers an essential part of “making”.
    Martin is relatively new to the world of the Arduino, but he has already produced several fun projects.
    In our conversation, we explored many of these projects, and also looked at some very ambitious ideas for future projects.
    In one of his projects, Martin used all of his skills, electronics, coding, and art, to build Light Gary, a colorful creature with a clock and a head that lights up.
    In another project, with the help of Dario, a friend and electronics expert, he built a gadget that reminds him to drink his beer. The beer gadget consists of just 4 parts: a buzzer, an accelerometer, a clock, and a diode.
    One of his current projects is Virtual City Windows, a system that consists of large high-definition video walls installed in cities around the world. These systems enable two-way communications between any two cities, giving people a view into life around the world.
    Martin is also very much into virtual and augmented reality, and we spent some time looking into this exciting technology, including a headset that Martin is building.
    I am sure you will enjoy this conversation.
    This is Tech Explorations Podcast episode 4 part 1.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:00] Introducing Martin Zwigl
    [0:04:50] Martin talks about his background in software development, how he became an Arduino maker
    [0:10:29] The making of “Light Gary”:
    Part 1
    Part 2
    Part 3
    [0:22:28] Voice controlled LED with Google Assistant, an ESP32 project
    [0:23:23] Keep your beer cold
    The full video for this interview is available, please check it out.
    In this episode, Dr. Peter Dalmaris (that’s me!) talks with Martin Zwigl.
    Martin attended a technical school for mechanical engineering in Austria. However, he never worked as an engineer and instead, he became a Software Developer.
    Earlier in life, Martin built many remote-controlled cars and planes. As a software developer, most of his work with electronics involves a lot of coding, which he considers an essential part of “making”.
    Martin is relatively new to the world of the Arduino, but he has already produced several fun projects.
    In our conversation, we explored many of these projects, and also looked at some very ambitious ideas for future projects.
    In one of his projects, Martin used all of his skills, electronics, coding, and art, to build Light Gary, a colorful creature with a clock and a head that lights up.
    In another project, with the help of Dario, a friend and electronics expert, he built a gadget that reminds him to drink his beer. The beer gadget consists of just 4 parts: a buzzer, an accelerometer, a clock, and a diode.
    One of his current projects is Virtual City Windows, a system that consists of large high-definition video walls installed in cities around the world. These systems enable two-way communications between any two cities, giving people a view into life around the world.
    Martin is also very much into virtual and augmented reality, and we spent some time looking into this exciting technology, including a headset that Martin is building.
    I am sure you will enjoy this conversation.
    This is Tech Explorations Podcast episode 4 part 1.
    The Tech Explorations Podcast is a podcast prod
    29 min
  • Alain Pannetrat discusses his journey from tinkerer to open-source hardware engineering (part 2)
    The full video for this interview is available, please check it out.
    In this episode, Dr. Peter Dalmaris talks with Alain Pannetrat.
    Alain is the founder of OMZLO, a company that designs, manufactures and sells open-source hardware with a focus on wired IoT.
    Alain also works as a product manager and researcher for the Cloud Security Alliance.
    He previously worked as an IT expert for the French data protection authority (CNIL) and as a smartcard security consultant in the banking industry.
    He holds a Ph.D. in applied cryptography but discovered a passion for electronics the day he bought his first Arduino UNO.
    In my conversation with Alain Pannetrat, we discuss NoCAN, a platform that uses CAN bus to network dozens of Arduino nodes with a single wire.
    NoCAN is a technology that is very interesting on its own, and I’ve spent a big bunch of the interview discussing it with Alain.
    But apart from the technology, I was very interested in Alain’s experience in setting up a business around NoCAN, and running two Kickstarter campaigns.
    When it comes to electronics and manufacturing, Alain is totally self-taught.
    I am sure you will enjoy this conversation.
    This is Tech Explorations Podcast episode 3 part 2.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:37] NoCAN Kickstarter campaign
    [0:01:59] Important design feature of NoCAN: Every node has two microcontrollers
    [0:05:40] Alain talks about his experiences and challenges with assembling, testing, manufacturing and budgeting during his kickstarter campaign
    [0:16:23] Alain’s future plans for NoCAN
    [0:18:32] Alain’s advice to our listeners
    The full video for this interview is available, please check it out.
    In this episode, Dr. Peter Dalmaris talks with Alain Pannetrat.
    Alain is the founder of OMZLO, a company that designs, manufactures and sells open-source hardware with a focus on wired IoT.
    Alain also works as a product manager and researcher for the Cloud Security Alliance.
    He previously worked as an IT expert for the French data protection authority (CNIL) and as a smartcard security consultant in the banking industry.
    He holds a Ph.D. in applied cryptography but discovered a passion for electronics the day he bought his first Arduino UNO.
    In my conversation with Alain Pannetrat, we discuss NoCAN, a platform that uses CAN bus to network dozens of Arduino nodes with a single wire.
    NoCAN is a technology that is very interesting on its own, and I’ve spent a big bunch of the interview discussing it with Alain.
    But apart from the technology, I was very interested in Alain’s experience in setting up a business around NoCAN, and running two Kickstarter campaigns.
    When it comes to electronics and manufacturing, Alain is totally self-taught.
    I am sure you will enjoy this conversation.
    This is Tech Explorations Podcast episode 3 part 2.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:37] NoCAN Kickstarter campaign
    [0:01:59] Important design feature of NoCAN: Every node has two microcontrollers
    [0:05:40] Alain talks about his experiences and challenges with assembling, testing, manufacturing and budgeting during his kickstarter campaign
    [0:16:23] Alain’s future plans for NoCAN
    [0:18:32] Alain’s advice to our listeners
    23 min
  • Alain Pannetrat discusses his journey from tinkerer to open-source hardware engineering (part 1)
    The full video for this interview is available, please check it out.
    In this episode, Dr. Peter Dalmaris talks with Alain Pannetrat.
    Alain is the founder of OMZLO, a company that designs, manufactures and sells open-source hardware with a focus on wired IoT.
    Alain also works as a product manager and researcher for the Cloud Security Alliance.
    He previously worked as an IT expert for the French data protection authority (CNIL) and as a smartcard security consultant in the banking industry.
    He holds a Ph.D. in applied cryptography but discovered a passion for electronics the day he bought his first Arduino UNO.
    In my conversation with Alain Pannetrat, we discuss NoCAN, a platform that uses CAN bus to network dozens of Arduino nodes with a single wire.
    NoCAN is a technology that is very interesting on its own, and I’ve spent a big bunch of the interview discussing it with Alain.
    But apart from the technology, I was very interested in Alain’s experience in setting up a business around NoCAN, and running two Kickstarter campaigns.
    When it comes to electronics and manufacturing, Alain is totally self-taught.
    I am sure you will enjoy this conversation.
    This is Tech Explorations Podcast episode 3 part 1.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:00] Introducing Alain Pannetrat
    [0:03:04] Alain talks about his background, his company Omzlo, and his product NoCAN, a wired IoT Platform for makers
    [0:07:29] Alain’s introduction to hardware such as the Arduino and the Raspberry Pi
    [0:11:36] Omzlo home page
    [0:14:28] Connecting Arduino-compatible nodes through CAN-bus
    [0:19:34] An example application to begin with for someone who’s learning to use NoCAN
    [0:23:14] Wireless vs wired, advantages and disadvantages
    The full video for this interview is available, please check it out.
    In this episode, Dr. Peter Dalmaris talks with Alain Pannetrat.
    Alain is the founder of OMZLO, a company that designs, manufactures and sells open-source hardware with a focus on wired IoT.
    Alain also works as a product manager and researcher for the Cloud Security Alliance.
    He previously worked as an IT expert for the French data protection authority (CNIL) and as a smartcard security consultant in the banking industry.
    He holds a Ph.D. in applied cryptography but discovered a passion for electronics the day he bought his first Arduino UNO.
    In my conversation with Alain Pannetrat, we discuss NoCAN, a platform that uses CAN bus to network dozens of Arduino nodes with a single wire.
    NoCAN is a technology that is very interesting on its own, and I’ve spent a big bunch of the interview discussing it with Alain.
    But apart from the technology, I was very interested in Alain’s experience in setting up a business around NoCAN, and running two Kickstarter campaigns.
    When it comes to electronics and manufacturing, Alain is totally self-taught.
    I am sure you will enjoy this conversation.
    This is Tech Explorations Podcast episode 3 part 1.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:00] Introducing Alain Pannetrat
    [0:03:04] Alain talks about his background, his company Omzlo, and his product NoCAN, a wired IoT Platform for makers
    [0:07:29] Alain’s introduction to hardware such as the Arduino and the Raspberry Pi
    [0:11:36] Omzlo home page
    [0:14:28] Connecting Arduino-compatible nodes through CAN-bus
    [0:19:34] An example application to begin with for someone who’s learning to use NoCAN
    [0:23:14] Wireless vs wired, advantages and di
    29 min
  • George Katz engineering water rockets (part 3)
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris talks with George Katz.
    George Katz has been making things ever since he can remember. As a child, he used to make paper models of all kinds of things, until his parents bought him a 2-transistor radio kit. From that point, he was interested in all things electronic.
    He studied electronics in high school and later completed his degree in Computer Engineering from UNSW. He enjoyed the course because it combined electronics with software and so that computers would interact with the real world. There, he also became interested in robotics and built a number of research robots for his thesis and for the AI department for other students to use. After university, his day job was on developing software for various companies, but electronics remained his hobby.
    About 13 years ago he saw an episode of MythBusters that featured water rockets.
    Searching online, he discovered a whole world of DIY makers that made rockets and posted instructions on how to do that. George talked to father, and within 3 hours, they had built a launcher and launched their first rocket in the backyard. From that point on, the whole family was hooked on building ever more complex and higher performing rockets. They also joined the local rocketry club (NSWRA) which opened a whole new world of like-minded individuals with a lot of experience in the field to learn from.
    To this day, George and his family still very much enjoy the engineering challenge of building and flying rockets. He uses his electronics knowledge for rocketry payloads and ground launch equipment. Though he occasionally does fly solid propellant rockets, his passion still is building water rockets. Both of George’s teenage boys are also a great help with all aspects of the hobby.
    George shares his experiences as much as possible online and runs a website with instructional videos as well as launch and experiment reports. The website contains many of the hard to find details about water rockets so that others can learn from his successes and mistakes the same way people shared their knowledge with him when he started out.
    This is Tech Explorations Podcast episode 1 part 3.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:21] Thunda 2019 – Rocket Launch Event
    [0:07:00] Rocketry Clubs
    [0:10:50] Resources & Contact Information:
    Air Command Rockets – YouTube
    MythBusters Episode 42: Bottle Rocket Blast-off
    Dean’s Benchtop – Experimental Thrust Curve of a Water Rocket
    Thunda 2019 – Rocket Launch Event Info
    Australian Rocketry’s Thunda Down Under 2015
    NSW Rocketry Association
    Air Command Water Rockets Contact Details
    Twitter: @aircommand
    Website
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris talks with George Katz.
    George Katz has been making things ever since he can remember. As a child, he used to make paper models of all kinds of things, until his parents bought him a 2-transistor radio kit. From that point, he was interested in all things electronic.
    He studied electronics in high school and later completed his degree in Computer Engineering from UNSW. He enjoyed the course because it combined electronics with software and so that computers would interact with the real world. There, he also became interested in robotics and built a number of research robots for his thesis and for the AI department for other students to use. After university, his day job was on developing software for various companies, but electronics remained his hobby.
    About 13 years ago he saw an episode of MythBusters that featured water rockets.
    Searching online, he discovered a whole wor
    16 min
  • George Katz engineering water rockets (part 2)
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris talks with George Katz.
    George Katz has been making things ever since he can remember. As a child, he used to make paper models of all kinds of things, until his parents bought him a 2-transistor radio kit. From that point, he was interested in all things electronic.
    He studied electronics in high school and later completed his degree in Computer Engineering from UNSW. He enjoyed the course because it combined electronics with software and so that computers would interact with the real world. There, he also became interested in robotics and built a number of research robots for his thesis and for the AI department for other students to use. After university, his day job was on developing software for various companies, but electronics remained his hobby.
    About 13 years ago he saw an episode of MythBusters that featured water rockets.
    Searching online, he discovered a whole world of DIY makers that made rockets and posted instructions on how to do that. George talked to father, and within 3 hours, they had built a launcher and launched their first rocket in the backyard. From that point on, the whole family was hooked on building ever more complex and higher performing rockets. They also joined the local rocketry club (NSWRA) which opened a whole new world of like-minded individuals with a lot of experience in the field to learn from.
    To this day, George and his family still very much enjoy the engineering challenge of building and flying rockets. He uses his electronics knowledge for rocketry payloads and ground launch equipment. Though he occasionally does fly solid propellant rockets, his passion still is building water rockets. Both of George’s teenage boys are also a great help with all aspects of the hobby.
    George shares his experiences as much as possible online and runs a website with instructional videos as well as launch and experiment reports. The website contains many of the hard to find details about water rockets so that others can learn from his successes and mistakes the same way people shared their knowledge with him when he started out.
    This is Tech Explorations Podcast episode 1 part 2.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:47] Hardware – MythBusters Episode 42: Bottle Rocket Blast-off
    [0:13:53] The evolution of Air Command Water Rockets
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris talks with George Katz.
    George Katz has been making things ever since he can remember. As a child, he used to make paper models of all kinds of things, until his parents bought him a 2-transistor radio kit. From that point, he was interested in all things electronic.
    He studied electronics in high school and later completed his degree in Computer Engineering from UNSW. He enjoyed the course because it combined electronics with software and so that computers would interact with the real world. There, he also became interested in robotics and built a number of research robots for his thesis and for the AI department for other students to use. After university, his day job was on developing software for various companies, but electronics remained his hobby.
    About 13 years ago he saw an episode of MythBusters that featured water rockets.
    Searching online, he discovered a whole world of DIY makers that made rockets and posted instructions on how to do that. George talked to father, and within 3 hours, they had built a launcher and launched their first rocket in the backyard. From that point on, the whole family was hooked on building ever more complex and higher performing rockets. They also joined the loc
    35 min
  • George Katz engineering water rockets (part 1)
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris talks with George Katz.
    George Katz has been making things ever since he can remember. As a child, he used to make paper models of all kinds of things, until his parents bought him a 2-transistor radio kit. From that point, he was interested in all things electronic.
    He studied electronics in high school and later completed his degree in Computer Engineering from UNSW. He enjoyed the course because it combined electronics with software and so that computers would interact with the real world. There, he also became interested in robotics and built a number of research robots for his thesis and for the AI department for other students to use. After university, his day job was on developing software for various companies, but electronics remained his hobby.
    About 13 years ago he saw an episode of MythBusters that featured water rockets.
    Searching online, he discovered a whole world of DIY makers that made rockets and posted instructions on how to do that. George talked to father, and within 3 hours, they had built a launcher and launched their first rocket in the backyard. From that point on, the whole family was hooked on building ever more complex and higher performing rockets. They also joined the local rocketry club (NSWRA) which opened a whole new world of like-minded individuals with a lot of experience in the field to learn from.
    To this day, George and his family still very much enjoy the engineering challenge of building and flying rockets. He uses his electronics knowledge for rocketry payloads and ground launch equipment. Though he occasionally does fly solid propellant rockets, his passion still is building water rockets. Both of George’s teenage boys are also a great help with all aspects of the hobby.
    George shares his experiences as much as possible online and runs a website with instructional videos as well as launch and experiment reports. The website contains many of the hard to find details about water rockets so that others can learn from his successes and mistakes the same way people shared their knowledge with him when he started out.
    This is Tech Explorations Podcast episode 1 part 1.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:00] Introducing George Katz
    [0:03:35] George’s background
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris talks with George Katz.
    George Katz has been making things ever since he can remember. As a child, he used to make paper models of all kinds of things, until his parents bought him a 2-transistor radio kit. From that point, he was interested in all things electronic.
    He studied electronics in high school and later completed his degree in Computer Engineering from UNSW. He enjoyed the course because it combined electronics with software and so that computers would interact with the real world. There, he also became interested in robotics and built a number of research robots for his thesis and for the AI department for other students to use. After university, his day job was on developing software for various companies, but electronics remained his hobby.
    About 13 years ago he saw an episode of MythBusters that featured water rockets.
    Searching online, he discovered a whole world of DIY makers that made rockets and posted instructions on how to do that. George talked to father, and within 3 hours, they had built a launcher and launched their first rocket in the backyard. From that point on, the whole family was hooked on building ever more complex and higher performing rockets. They also joined the local rocketry club (NSWRA) which opened a whole new world of
    20 min
  • Wayne Stambaugh talks about Kicad’s past, present, and future
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris talks with Wayne Stambaugh.
    Wayne has been a developer for the KiCad project for over 12 years and the lead project developer for the last 6 years. He is an electronics engineer with over 30 years of experience in electronics design and software development. Wayne has done a little bit of everything during his career including digital, analog, and embedded design as well as embedded programming in assembly and C and desktop programming in C, C++, and Python.
    In this interview, Wayne takes us back in time, to tell the story of KiCad’s early days, trials and tribulations. Of course, we also discussed the future of KiCad. With CERN backing the project, as well as other organizations (like Wit, which now employs Wayne full time to work on KiCad as its leader), and thousands of people contributing donations, I expect KiCad to grow and became perhaps the best open-source PCB tool.
    Wayne spoke about his experience at the recent first KiCad conference (KiCon) and the future of KiCad. Tech Explorations was a proud sponsor of KiCon.
    0 min

About Stemiverse Podcast

From the publisher's feed

Stemiverse is a podcast where every two weeks Dr. Peter Dalmaris talks with amazing educators about the most important topics in STEM Education.