Stemiverse Podcast

Stemiverse Podcast

By Tech ExplorationsTechnologyEducationHow ToDesign
Download on the App Store

Stemiverse Podcast episodes

  • George Katz engineering water rockets (full episode)
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris talks with George Katz.
    George Katz has been making things ever since he can remember. As a child, he used to make paper models of all kinds of things, until his parents bought him a 2-transistor radio kit. From that point, he was interested in all things electronic.
    He studied electronics in high school and later completed his degree in Computer Engineering from UNSW. He enjoyed the course because it combined electronics with software and so that computers would interact with the real world. There, he also became interested in robotics and built a number of research robots for his thesis and for the AI department for other students to use. After university, his day job was on developing software for various companies, but electronics remained his hobby.
    About 13 years ago he saw an episode of MythBusters that featured water rockets.
    Searching online, he discovered a whole world of DIY makers that made rockets and posted instructions on how to do that. George talked to father, and within 3 hours, they had built a launcher and launched their first rocket in the backyard. From that point on, the whole family was hooked on building ever more complex and higher performing rockets. They also joined the local rocketry club (NSWRA) which opened a whole new world of like-minded individuals with a lot of experience in the field to learn from.
    To this day, George and his family still very much enjoy the engineering challenge of building and flying rockets. He uses his electronics knowledge for rocketry payloads and ground launch equipment. Though he occasionally does fly solid propellant rockets, his passion still is building water rockets. Both of George’s teenage boys are also a great help with all aspects of the hobby.
    George shares his experiences as much as possible online and runs a website with instructional videos as well as launch and experiment reports. The website contains many of the hard to find details about water rockets so that others can learn from his successes and mistakes the same way people shared their knowledge with him when he started out.
    This is Tech Explorations Podcast episode 1.
    The Tech Explorations Podcast is a podcast produced by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:00] Introducing George Katz
    [0:03:06] George’s background
    [0:17:42] Hardware
    [0:30:48] The evolution of Air Command Water Rockets
    [0:50:08] Thunda 2019 – Rocket Launch Event
    [0:56:48] Rocketry Clubs
    [1:00:39] Resources & Contact Information:
    Air Command Rockets – YouTube
    MythBusters Episode 42: Bottle Rocket Blast-off
    Dean’s Benchtop – Experimental Thrust Curve of a Water Rocket
    Thunda 2019 – Rocket Launch Event Info
    Australian Rocketry’s Thunda Down Under 2015
    NSW Rocketry Association
    Air Command Water Rockets Contact Details
    Twitter: @aircommand
    Website
    The full video for this interview is available, please check it out.
    In this episode, Peter Dalmaris talks with George Katz.
    George Katz has been making things ever since he can remember. As a child, he used to make paper models of all kinds of things, until his parents bought him a 2-transistor radio kit. From that point, he was interested in all things electronic.
    He studied electronics in high school and later completed his degree in Computer Engineering from UNSW. He enjoyed the course because it combined electronics with software and so that computers would interact with the real world. There, he also became interested in robotics and built a number of research robots for his thesis and for the AI department for other students to use. After university, his day job was on developing software for various companies, but electronics remained
    1 hr 6 min
  • Stemiverse 0058 – Kieran Nolan talks about the Blockchain in education, RocketShoes
    [spp-player] In this episode, Dr. Peter Dalmaris catches up with Kieran Nolan. This is Kieran’s second appearance on Stemiverse. Kieran is an Educational Technologist based in Melbourne, Australia. He’s an International Speaker, CoderDojo Mentor, Blockchain Expert, and Business Development Executive. Kieran is driven by innovation, disruption, and lifelong learning. These drivers empower him to play […]
    1 hr 1 min
  • Stemiverse 0057 – Kavita Krishnaswamy discusses assistive robots
    [spp-player] In this episode, Dr. Peter Dalmaris talks with Kavita Krishnaswamy. Kavita is a Ph.D. candidate in Computer Science at the University of Maryland, Baltimore (UMBC) working with Dr. Tim Oates. Kavita is a Google Lime Scholar and Microsoft Research Fellow. She is both a Ford Foundation Predoctoral and National Science Foundation Graduate Research Fellow. […]
    57 min
  • Stemiverse 0057 - Kavita Krishnaswamy discusses assistive robots
    In this episode, Dr. Peter Dalmaris talks with Kavita Krishnaswamy.
    Kavita is a Ph.D. candidate in Computer Science at the University of Maryland, Baltimore (UMBC) working with Dr. Tim Oates.
    Kavita is a Google Lime Scholar and Microsoft Research Fellow.
    She is both a Ford Foundation Predoctoral and National Science Foundation Graduate Research Fellow.
    She’s also worked at the National Science Foundation's Engineering Research Center - Quality of Life Technology Center (QoLT) in Carnegie Mellon and University of Pittsburgh and IBM Business consulting services.
    Kavita is a professional researcher with a physical disability. She’s motivated by a powerful, innate force: autonomy is the soul of independent daily living that she has achieved with the advancement of technology.
    Her research involves the development of robotic systems to provide assistance and increase independence for people with disabilities.
    She is developing several prototype robotic systems that will support transferring, repositioning, and personal care, with a focus on accessible user interfaces for control that are feasible for persons with severe disabilities (and this is the main topic of our discussion in this episode).
    The show notes to this episode can be found here: https://techexplorations.com/podcast/stemiverse-0057-kavita-krishnaswamy/
    57 min
  • Stemiverse 0056 - Gil Poznanski discusses thinking like a maker, exploring ideas & P2P learning
    In this episode, Peter talks with Gil Poznanski.
    Gil is all about engaging people with technology.
    As an international leader in the Maker community, inspiring speaker and teacher, Gil has spent the last eight years building a proven track record in developing STEM and Maker environments and is excited by the challenge of harnessing technology in new and innovative ways.
    Gil is always looking for the personal narrative in every project and shares it with as many people as possible.
    Gil is currently the Creative Technologies Lead at the Department of Education NSW helping shape STEAM within the public education sector. In the past, he worked with the City of Melbourne running the Makerspace at the Library @ the Dock in Docklands, as well as developed and deployed the Creative Technologies Hub for Hobsons Bay City Council.
    In our discussion, we drill into Gil’s previous life in the movie industry in Los Angeles and how his learnings and experiences lead to his re-invention as the “Kosher Tony Stark.” We talk about his experiments with cutting edge technology, prototyping, how he’s using social media and YouTube to expand his reach, and much more.
    The show notes to this episode can be found here: https://techexplorations.com/podcast/stemiverse-0056-gil-poznanski/
    1 hr 18 min
  • Stemiverse 0055 – Norman Pirollo and the art of woodworking
    [spp-player] In this episode, Peter talks with Norman Pirollo. Norman is the editor of WOODSKILLS magazine, an online woodworking instructor, and author. In a previous life, he was a C++ developer for some of the largest computer companies in the world. He decided to turn his life around and dedicate himself to CAD Design, prototyping and […]
    1 hr 12 min
  • Stemiverse 0055 – Norman Pirollo and the art of woodworking
    In this episode, Peter talks with Norman Pirollo.
    Norman is the editor of WOODSKILLS magazine, an online woodworking instructor, and author. In a previous life, he was a C++ developer for some of the largest computer companies in the world. He decided to turn his life around and dedicate himself to CAD Design, prototyping and creating contemporary furniture at his company, Pirollo Design.
    Norman writes and publishes woodworking courseware on his website, and also teaches woodworking in the traditional “in-person” way.
    He has authored and published four books:
    The Wood Artist: Creating Art Through Wood
    Start Your Own Woodworking Business
    From Hi-Tech to Lo-Tech: A Woodworker’s Journey
    and Abstracted: An Artist’s Journey (on Amazon and Google Books).
    Most recently, Norman published WOODSKILLS, a bi-annual magazine about fine woodworking.
    This is Stemiverse Podcast episode 55.
    Stemiverse podcast is brought to you by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [0:00:00] Introduction – Introducing Norman Pirollo
    [0:01:51] Greetings
    [0:03:38] Norman talks about his background in electrotechnology and later in computer software and computer science
    [0:09:03] Norman’s book: From Hi-Tech to Lo-Tech: A Woodworker’s Journey
    [0:09:23] The transition from high-tech to low-tech
    [0:14:05] Norman’s transition from an apprentice woodworker to a wood artist
    [0:17:04] About maquettes (scale models)
    [0:18:15] Norman’s entry into the art world happened thanks to a touring craft exhibition in 2009
    [0:20:07] Generalized lessons from Norman’s experience of transitioning from the corporate to the woodworker’s world
    [0:24:50] Instructional learning
    [0:27:16] Cleveland Institute of Electronics
    [0:28:52] How Norman manages his time while being a woodworker an artist and a teacher
    [0:30:15] The appeal of woodworking vs. DIY electronics and its current resurgence
    [0:32:50] The story of how Peter came across Norman’s work due to a custom wooden enclosure
    [0:36:06] Norman’s choice of tools: Google SketchUp, video editing software, and more.
    [0:37:44] Lifelong learning as a maker
    [0:39:16] Norman’s advice to makers interested in woodworking but without access to a dedicated space/workshop
    [0:41:13] The movement towards traditional woodworking that does not involve machinery but hand tools, e.g., The Unplugged Woodshop
    [0:45:08] Norman’s courses: Woodworking Course – Hand Tools Course
    [0:47:31] The youngest age one can begin a woodworking apprenticeship and the benefits of hands-on training
    [0:53:37] The industrialization of furniture making vs. the resurgence of the artistic approach
    [0:55:13] Rapid Fire Questions
    [0:55:25] Norman’s advice to teachers about woodworking’s potential contribution to education
    [0:59:42] Norman’s book recommendations: James Krenov’s books and the philosophy of woodworking
    [1:04:41] Going beyond the “how” and towards the “why”
    [1:07:14] Norman’s Contact Information:
    Websites: WoodSkills and Pirollo Design
    Instagram: @woodskillsmag and @pirollodesign
    Twitter: @woodskills
    Magazine: WOODSKILLS
    Additional resources: Website (in Russian) about James Krenov (videos in US English included, describing the man and his philosophy). According to Norman, Krenov “is widely recognized as one of the best craftsmen of the 20th century and was instrumental in a return to traditional woodworking with emphasis on quality and originality.”
    In this episode, Peter talks with Norman Pirollo.
    Norman is the editor of WOODSKILLS magazine, an online woodworking instructor, and author. In a previous life, he was a C++ developer for some of the largest computer companies in the world. He decided to turn his li
    1 hr 12 min
  • Stemiverse 0055 - Norman Pirollo and the art of woodworking
    In this episode, Peter talks with Norman Pirollo.
    Norman is the editor of WOODSKILLS magazine, an online woodworking instructor, and author. In a previous life, he was a C++ developer for some of the largest computer companies in the world. He decided to turn his life around and dedicate himself to CAD Design, prototyping and creating contemporary furniture at his company, Pirollo Design.
    Norman writes and publishes woodworking courseware on his website, and also teaches woodworking in the traditional “in-person” way.
    He has authored and published four books:
    • The Wood Artist: Creating Art Through Wood
    • Start Your Own Woodworking Business
    • From Hi-Tech to Lo-Tech: A Woodworker's Journey
    • and Abstracted: An Artist's Journey (on Amazon and Google Books).
    Most recently, Norman published WOODSKILLS, a bi-annual magazine about fine woodworking.
    The show notes to this episode can be found here: https://techexplorations.com/podcast/stemiverse-0055-norman-pirollo/
    1 hr 12 min
  • Stemiverse 0054 – Doonie Benton discusses life-long learning, taking charge, motorcycles and golf
    In this episode, Peter and Marcus talk with Doonie aka Geoffrey Benton.
    Geoffrey was born in Frankston in 1948 when they still shoed horses in the stables near the railway station. Geoffrey attended Tech school and became an apprentice as a plastic die-maker/toolmaker.
    He worked as a maintenance fitter and in later life he became a policeman, then a truck driver and has also owned several small businesses.
    He retired in 2012 and went on to discover a range of activities that keep him interested and, sometimes, frustrated! These include filmmaking, short story writing, making model boats and generally beavering away in his shed for days at a time. He recently discovered the joys and frustrations of learning how to use a laser cutter and has since filled the house with tiny wooden boxes.
    Then, he was bitten by the electronics bug in the form of Arduino and is now trying to combine all of his skills to one end.
    He has had a lifetime love affair with motorcycles including building, restoring, racing, and touring. In the shed at the moment is a home-built 920cc V twin solo and a 1500cc Kawasaki V twin with a sidecar and trailer.
    Geoffrey lives in country Victoria with his wife and two cats.
    This is Stemiverse Podcast episode 54.
    Stemiverse podcast is brought to you by Tech Explorations, a leading provider of educational resources for Makers, STEM students, and teachers. Go to techexplorations.com to see a complete list of our books and courses covering the Arduino, Raspberry Pi, and electronics.
    Show Notes
    [00:00] Introduction – Introducing Doonie Benton
    [02:23] Greetings
    [03:36] Doonie talks about his background
    [05:28] Being a classic maker
    [08:14] Being a person of “the bush“*
    [09:00] Doonie’s favorite tool: The laser cutter
    [09:26] Doonie describes his design – CAD 2D software
    [10:04] Solving problems sideways and looking for alternatives
    [12:31] Doonie’s retirement experience and motorboat making
    [16:24] Building stuff based on instructions vs. designing plans of his own and converting freely available plans
    [18:55] Doonie’s ideal workshop
    [19:43] About motorcycles
    [21:01] Doonie’s resourcefulness is both a result of innate abilities as well as life experience
    [22:07] Camping in the wilderness
    [23:21] Doonie’s undertakings with electronics and Arduino
    [25:31] What is Arduino?
    [26:27] HyperCard, a programming tool for Apple Macintosh, 1998
    [27:55] What has Doonie found most challenging with the Arduino?
    [9:24] Peter comments on Doonie’s craftsmanship
    [30:44] Doonie’s other hobbies; Short story writing, filmmaking
    [33:58] Moving to Briagolong, Victoria (Australia), getting involved with the community and making a movie
    [38:12] Learning things on the fly – Taking charge and getting the right people to do the right things
    [42:18] The difference between pre and post-retirement activities, and knowing how to retire
    [45:58] Rapid Fire Questions
    [46:11] Donnie’s Favorite Author: John Sandford
    [47:22] If you could put one line on a billboard, what would it be?
    [49:06] What advice would you like to give to your 12-year-old self?
    [55:11] Doonie’s Contact Information: Email, Facebook
    *Australian idiom referring to the wilderness (Wikipedia link)
    In this episode, Peter and Marcus talk with Doonie aka Geoffrey Benton.
    Geoffrey was born in Frankston in 1948 when they still shoed horses in the stables near the railway station. Geoffrey attended Tech school and became an apprentice as a plastic die-maker/toolmaker.
    He worked as a maintenance fitter and in later life he became a policeman, then a truck driver and has also owned several small businesses.
    He retired in 2012 and went on to discover a range of activities that keep him interested and, sometimes, frustrated! These include filmmaking, short story writing, making model boats and generally beavering away in his shed for days at a time. He recently discovered the joys and frustrations of learning
    59 min

About Stemiverse Podcast

From the publisher's feed

Stemiverse is a podcast where every two weeks Dr. Peter Dalmaris talks with amazing educators about the most important topics in STEM Education.