Welcome back to the Power Driven Diesel podcast. We’ve had quite a few people ask for more Common Rail content, so we figured it was time to dive in. In this episode, Meyer joins us to walk through a bunch of topics that matter if you’re running a Common Rail Cummins or thinking about building one. We get into tuning strategies, CP3 fuel systems, turbo behavior, and how it all works together when you start pushing power.

We kick things off with tuning basics. Meyer explains fuel timing and duration in a way that makes sense, especially if you’re new to this stuff. There’s a good breakdown of what it means when a truck is injecting fuel after top dead center and why emissions tuning often does that. We talk about how shortening duration and improving injection rate helps power, efficiency, and driveability. We also get into pedal maps and how your throttle input turns into actual fuel output. That part gets overlooked a lot, but it has a huge effect on how the truck feels behind the wheel.

From there we get into VGT turbo tuning. Will shares what happened when he upgraded the turbo on his wife’s Excursion and how the truck felt super lazy until he figured out the vane control. Just closing the vanes to make more boost actually slowed the truck down, and once he opened them back up, it ripped again. That’s a good lesson for anyone who thinks boost equals speed, because the truth is it’s all about balance and airflow.

We also talk about CP3 pump setups. For a long time, making big power meant running two or three pumps, but that has changed. Nowadays, a single 14mm pump or a dual CP3 setup can support big numbers, depending on what you’re doing. Meyer and Will both have experience running different setups and share what works better for street trucks versus all-out builds. The bottom line is, if you’re adding hard parts like injectors or turbos, you’ve got to retune or you’re going to leave a lot on the table.

Toward the end, we get into block design and why we’ve moved to using 6.7 blocks in most of our race engines. They have more material between the cylinders, stronger cooling, and we’ve seen them hold up better than older 5.9 blocks when pushed hard. That does not mean the 12-valve stuff is bad. It just means that newer options give you more room to grow, especially when you start mixing parts like 24-valve heads or building hybrids.

There is still a lot we did not get to, like transmissions and more platform-specific tuning, so if you have questions, let us know in the comments. We read those and we’re always down to do a follow-up. Thanks for listening, and we will see you in the next episode.