Here is a video segment on the Hensel porty ringlight that we use. Below you will find the transcript of the Video.

Transcript:

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look.

This is our secondary porty kit. In it, we have the porty ringlight. The pack has two batteries stored over on this side. The pack is in the middle and the ringlight here on the other side with the cords for it. It's important that you keep this ringlight very protected because the bulb can break and the pack becomes near worthless.

The pack here is right here in the middle. Again, one of the really great things about the Hensel porties is that they are adjustable tenth of a stop increments digitally. We can plug up to two porty heads in here if we need to. We have a modeling light, audible signaling that the pack has recycled. We can recharge straight from the pack or in an off board charger.

The pack has a slaving capability so that one pack can be triggered by a handheld flash, power switch. It also has an indicator to let us know how much battery power we have left as we're shooting along so that we know when we need to switch a battery out. __Also, in this porty kit is are sync cord hardwired, so if we had to go hardwired we could. We would actually prefer to direct connect from the ringlight, on the back of the ringlight straight to the camera.

So that's the Porty ringlight kit, it's also labeled Pack 2 so if we know that a pack goes down, we can immediately go and switch it out to Pack 3, or Pack 1 or whatever pack we're using. And it packs all up nice and neat. And off we go.

Here is a video segment on the Hensel porty ringlight that we use. Below you will find the transcript of the Video.

Transcript:

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look.

This is our secondary porty kit. In it, we have the porty ringlight. The pack has two batteries stored over on this side. The pack is in the middle and the ringlight here on the other side with the cords for it. It's important that you keep this ringlight very protected because the bulb can break and the pack becomes near worthless.

The pack here is right here in the middle. Again, one of the really great things about the Hensel porties is that they are adjustable tenth of a stop increments digitally. We can plug up to two porty heads in here if we need to. We have a modeling light, audible signaling that the pack has recycled. We can recharge straight from the pack or in an off board charger.

The pack has a slaving capability so that one pack can be triggered by a handheld flash, power switch. It also has an indicator to let us know how much battery power we have left as we're shooting along so that we know when we need to switch a battery out. __Also, in this porty kit is are sync cord hardwired, so if we had to go hardwired we could. We would actually prefer to direct connect from the ringlight, on the back of the ringlight straight to the camera.

So that's the Porty ringlight kit, it's also labeled Pack 2 so if we know that a pack goes down, we can immediately go and switch it out to Pack 3, or Pack 1 or whatever pack we're using. And it packs all up nice and neat. And off we go.

Here is a video segment on the video kit that we use. Below you will find the transcript of the Video.

Transcript:

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look.

We are traveling much more now with video equipment, in addition to our still photography. These are the two cases that we use for our video equipment. The industry standard for traveling with video cameras really is the Porta Brace system.

They just know how to do it like nobody else does. In addition to our Porta Brace system case for our XL1, which you are actually looking at me on now, we also have our Tamrac case which holds our shotgun microphone with our windscreen, some on camera lamps, extra double A batteries and nine volts, an extra tape, another microphone just in case, and an AC converter so that the Canon XL1 can run off of wall power.

What I can't show you is the Canon XL1 that you are looking at me on, or the HD camera as a down shot, or the Canon Optura 100, which is our cutaway camera right there. These three cameras are varying sizes and capabilities that let us do a wide variety of things.

In the future, we're going to be adding lipstick cameras which will get you closer to the action and let you see up close and personal, what we do and how we do it. So that's a look at our video equipment that works hand in hand with the audio kits that we use.

Here is a video segment on the video kit that we use. Below you will find the transcript of the Video.

Transcript:

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look.

We are traveling much more now with video equipment, in addition to our still photography. These are the two cases that we use for our video equipment. The industry standard for traveling with video cameras really is the Porta Brace system.

They just know how to do it like nobody else does. In addition to our Porta Brace system case for our XL1, which you are actually looking at me on now, we also have our Tamrac case which holds our shotgun microphone with our windscreen, some on camera lamps, extra double A batteries and nine volts, an extra tape, another microphone just in case, and an AC converter so that the Canon XL1 can run off of wall power.

What I can't show you is the Canon XL1 that you are looking at me on, or the HD camera as a down shot, or the Canon Optura 100, which is our cutaway camera right there. These three cameras are varying sizes and capabilities that let us do a wide variety of things.

In the future, we're going to be adding lipstick cameras which will get you closer to the action and let you see up close and personal, what we do and how we do it. So that's a look at our video equipment that works hand in hand with the audio kits that we use.

Here is a video segment on the stands that we use. Below you will find the transcript of the Video.

Transcript:

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look.

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look. These are a variety of stand types that we've got here. This is a Matthews stand. Here's a Bogen Mini Avenger. Earlier we showed you some stands from our light case, that are the Bogen stands that are compact and tightened down.

One of the nice things about these Bogen stands is that they're interlocking which means that two stands are much more compact than if they were just stands that were strewn about. When you're traveling, making sure that things stay together and stay tight is absolutely critical. These things pop together, and they connect back together, and lock together. So we have the small version, and the large version.

Here's a Bogen 3373 stand. It compacts, it's a very nice, very light weight goes into very small spaces, but still works very well. This Bogen Mini Avenger, what we really like about the Bogen Mini Avenger is just how low it will go. It gets very low to the ground. The lower stand that you would get is the floor stand.

We have another floor stand. This thing allows us to get a light down very near to the ground. This springs all the way out, and it's a low stand, very similar to this one, this one just has a little more stability.

This is about as low as you can go and still get a stand that folds up, and it's ultra sturdy as well. So we have no problems putting a head on this stand. This Matthews stand, boy it's a great stand. The problem is it's bulky. When you fold this Matthews stands up, it still takes up a whole lot of space.

Now I want to tell you a little about C-stands. You got to be careful when you're getting a C-stand, because in this situation you have a C-stand that is affixed to the legs. When we were talking about sand bags, one of the things that you really can also do for extra security is to take the strap and run it over the top of this, so that once the vertical pole is in the base of the C-stand. The bag can't come off at all.

We were telling you about the difference with C-stands. The nice thing about a C-stands that has a removable top is that you can get it in different sizes; so you have a small size, you have a large size. They even get larger than that; you can get very, very large ones. These are about as big a size of a vertical riser as we would want to get and travel with. These barely fit in the cases that we use.

But boy, these are industrial strength. These are what they on movie sets. We like to use them very selectively when we're out on shoots. When we really need that extra rigidity beyond what a Bogen can provide. But in the case where you are getting a C-stand, I strongly encourage you to get one that has the removable base as opposed to the fixed base.

Because a base that's this size, while it's a nice stand, it just won't come apart and this dimension here won't fit into a traveling case that you're going to be traveling with for the most part. So that's a little bit about stands.

Here is a video segment on the stands that we use. Below you will find the transcript of the Video.

Transcript:

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look.

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look. These are a variety of stand types that we've got here. This is a Matthews stand. Here's a Bogen Mini Avenger. Earlier we showed you some stands from our light case, that are the Bogen stands that are compact and tightened down.

One of the nice things about these Bogen stands is that they're interlocking which means that two stands are much more compact than if they were just stands that were strewn about. When you're traveling, making sure that things stay together and stay tight is absolutely critical. These things pop together, and they connect back together, and lock together. So we have the small version, and the large version.

Here's a Bogen 3373 stand. It compacts, it's a very nice, very light weight goes into very small spaces, but still works very well. This Bogen Mini Avenger, what we really like about the Bogen Mini Avenger is just how low it will go. It gets very low to the ground. The lower stand that you would get is the floor stand.

We have another floor stand. This thing allows us to get a light down very near to the ground. This springs all the way out, and it's a low stand, very similar to this one, this one just has a little more stability.

This is about as low as you can go and still get a stand that folds up, and it's ultra sturdy as well. So we have no problems putting a head on this stand. This Matthews stand, boy it's a great stand. The problem is it's bulky. When you fold this Matthews stands up, it still takes up a whole lot of space.

Now I want to tell you a little about C-stands. You got to be careful when you're getting a C-stand, because in this situation you have a C-stand that is affixed to the legs. When we were talking about sand bags, one of the things that you really can also do for extra security is to take the strap and run it over the top of this, so that once the vertical pole is in the base of the C-stand. The bag can't come off at all.

We were telling you about the difference with C-stands. The nice thing about a C-stands that has a removable top is that you can get it in different sizes; so you have a small size, you have a large size. They even get larger than that; you can get very, very large ones. These are about as big a size of a vertical riser as we would want to get and travel with. These barely fit in the cases that we use.

But boy, these are industrial strength. These are what they on movie sets. We like to use them very selectively when we're out on shoots. When we really need that extra rigidity beyond what a Bogen can provide. But in the case where you are getting a C-stand, I strongly encourage you to get one that has the removable base as opposed to the fixed base.

Because a base that's this size, while it's a nice stand, it just won't come apart and this dimension here won't fit into a traveling case that you're going to be traveling with for the most part. So that's a little bit about stands.

Here is a video segment on the audio and sound kit that we use. Below you will find the transcript of the Video.

Transcript:

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look.

This is our audio kit. And when we're gathering audio for our video or sound to go with slides, we need to make sure we have the right microphones, whether it's a wired, handheld wireless, wireless lavaliere or whatever we need. We need to make sure that it's in here. It's a small pack. It's a small Tamrac case.

So lets have a look at what's in the audio kit. This is a cover that allows us to use the wireless microphone and attach it to our belt. Here is our M-Audio Micro Track II Recorder, what's really nice is you can plug direct in with two quarter inch microphone jacks, you can also use the T microphone and the microphone jack to capture wild sound.

What's really great though, is it captures to a CF card, so you don't have to worry about dealing with actual tape. Just like photos, just like files; you put the card into the card reader and drag files straight off and into your system.

This is a windscreen, a windscreen on the microphone. When you are out and about, it's important that you have a windscreen on; otherwise you will hear the sound of wind whipping through the microphone. This is a wireless mic. On the bottom of the wireless mic goes the Sennheiser adapter. The Sennheiser adapter allows you to make this microphone wireless as opposed to hardwired.

When we're doing a report for someone in particular, it's real easy to slip on what's called a mic flag with a windscreen, wireless and report just like that. If we were doing something for another broadcast network or someone else, this mic flag is easily changeable.

Here's two Sennheiser transmitter and receivers. We actually have another pair of them. I happen to be talking to you on one of them right now. In addition, we have straight XLR to quarter inch so that we can plug straight into the M-Audio and go straight into XLR mult box or other industry standard XLR jacks, it's a three-plug connector.

In the front here, is a whole collection of audio patch cords. Again, the quarter inch with quarter inch adapter to the smaller plug. A backup pair of headphones. We typically like to use our Bose wireless headphones. An extra microphone. All sorts of patch cords.

Also on the outside, in case we need to have a microphone up at a podium, this is actually an adapter so that we can connect the mic to a podium and screw into a mic holder. So that's our audio sound kit.

Here is a video segment on the audio and sound kit that we use. Below you will find the transcript of the Video.

Transcript:

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look.

This is our audio kit. And when we're gathering audio for our video or sound to go with slides, we need to make sure we have the right microphones, whether it's a wired, handheld wireless, wireless lavaliere or whatever we need. We need to make sure that it's in here. It's a small pack. It's a small Tamrac case.

So lets have a look at what's in the audio kit. This is a cover that allows us to use the wireless microphone and attach it to our belt. Here is our M-Audio Micro Track II Recorder, what's really nice is you can plug direct in with two quarter inch microphone jacks, you can also use the T microphone and the microphone jack to capture wild sound.

What's really great though, is it captures to a CF card, so you don't have to worry about dealing with actual tape. Just like photos, just like files; you put the card into the card reader and drag files straight off and into your system.

This is a windscreen, a windscreen on the microphone. When you are out and about, it's important that you have a windscreen on; otherwise you will hear the sound of wind whipping through the microphone. This is a wireless mic. On the bottom of the wireless mic goes the Sennheiser adapter. The Sennheiser adapter allows you to make this microphone wireless as opposed to hardwired.

When we're doing a report for someone in particular, it's real easy to slip on what's called a mic flag with a windscreen, wireless and report just like that. If we were doing something for another broadcast network or someone else, this mic flag is easily changeable.

Here's two Sennheiser transmitter and receivers. We actually have another pair of them. I happen to be talking to you on one of them right now. In addition, we have straight XLR to quarter inch so that we can plug straight into the M-Audio and go straight into XLR mult box or other industry standard XLR jacks, it's a three-plug connector.

In the front here, is a whole collection of audio patch cords. Again, the quarter inch with quarter inch adapter to the smaller plug. A backup pair of headphones. We typically like to use our Bose wireless headphones. An extra microphone. All sorts of patch cords.

Also on the outside, in case we need to have a microphone up at a podium, this is actually an adapter so that we can connect the mic to a podium and screw into a mic holder. So that's our audio sound kit.

Here is a video segment on the audio entertainment kit that we use. Below you will find the transcript of the Video.

Transcript:

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look.

One of the things that can make a big difference on a photo shoot is having music, but not just any music. From client's disposition to the subject being relaxed, having the right music is critical. _Recently we had the audio kit ready to go and somehow or another it didn't make it onto the truck. What we found that we had to do was stream the audio off the internet, rather than rely on our iPod collection.

As a result, we were at the whim of the online DJ, and the subjects that were being photographed were reacting negatively to the music that was being played, so we had to assign an assistant to make sure that the music that was being played was music that the subjects liked. And when the subjects didn't like what they were doing was making requests of the assistant to play this song or that song.

Our audio kit is packed in an old school bag that we had lying around. It's got a video iPod in it, an iHome clock radio, and a pair of wireless Advent speakers. So let's have a look at the kit. So here is our iHome clock radio. It's got an iPod adapter that works for the regular iPod, or the full size iPod.

A pair of wireless Advent speakers with the amplification built in, so all it needs is power. An iPod 60 GB with all the music that we have, legally. The power supplies for each of the speakers and the transmitter, as well as a power supply for the transmitter. All of these things pack neatly into this kit. And so that's our audio kit.

Here is a video segment on the audio entertainment kit that we use. Below you will find the transcript of the Video.

Transcript:

Hi, I'm John Harrington and we're going to break out and break down the wide variety of equipment we use to deliver images to our clients. Next we are going to show you one of the equipment kits we use when we are traveling on assignment. Each kit is different and has a very specific purpose. So lets take a look.

One of the things that can make a big difference on a photo shoot is having music, but not just any music. From client's disposition to the subject being relaxed, having the right music is critical. _Recently we had the audio kit ready to go and somehow or another it didn't make it onto the truck. What we found that we had to do was stream the audio off the internet, rather than rely on our iPod collection.

As a result, we were at the whim of the online DJ, and the subjects that were being photographed were reacting negatively to the music that was being played, so we had to assign an assistant to make sure that the music that was being played was music that the subjects liked. And when the subjects didn't like what they were doing was making requests of the assistant to play this song or that song.

Our audio kit is packed in an old school bag that we had lying around. It's got a video iPod in it, an iHome clock radio, and a pair of wireless Advent speakers. So let's have a look at the kit. So here is our iHome clock radio. It's got an iPod adapter that works for the regular iPod, or the full size iPod.

A pair of wireless Advent speakers with the amplification built in, so all it needs is power. An iPod 60 GB with all the music that we have, legally. The power supplies for each of the speakers and the transmitter, as well as a power supply for the transmitter. All of these things pack neatly into this kit. And so that's our audio kit.