Know How... (Audio)

Know How... (Audio)

Download on the App Store

Know How... (Audio) episodes

  • KH 369: Switch How - Part 1

    Switching from iOS to Android and back again.

    Hosts: Fr. Robert Ballecer, SJ, Megan Morrone, and Jason Howell

    For full show notes, visit https://twit.tv/shows/know-how/episodes/369

    Sponsor:

    • WordPress.com/knowhow
    • 53 min
    • KH 368: Multirotor 101 - Part III - Padre and Jason build a FPV system for the ever-popular SYMA system.

      Feedback:FPV Help -- William B. "KITAs, I am excited that you have brought drones back to Know How! I watched when you did drones in 2015, but only recently have I been getting very much into designing and building my own. I started with the trainer you suggested and have graduated to 250 and 450 class quads, but now I want FPV. I've been looking at some options and they all look either too expensive or too complicated. I'm not sure if I want goggles, because I actually like to SEE my drone in addition to being able to see FROM the drone. What are my options and what would you suggest for a budget of ~$200?" Eachine OTG Receiver ~$23
    • Allow me to interface a receiver with my PROPERLY Equipped Android phone or tablet
    • 5.8 Ghz (so it won't crowd the already crowded 2.4Ghz spectrum
    • THIS WON'T WORK ON ALL DEVICES!
    • Must support OTG (On The Go)
    • Must support UVC (USB Video Class)
    • Eachine TX526 Transmitter ~$18
    • 5.8Ghz (40 Channels)
    • 3 Output power levels (25/200/600MW)
    • Can transmit audio AND video
    • 7-24 Volts
    • Eachine RC832 5.8Ghz Receiver ~$15
    • 5.8Ghz
    • 48 channels
    • Eachine TX01 NTSC Super Mini Transmitter + Camera ~$22
    • 5.8Ghz
    • 25mw
    • Combines a camera with a transmitter/antenna
    • Can run on 3.3-5v (Can be run on a single LiPo)
    • Eachine EV100 720*540 5.8Ghz FPV Goggles ~$100
    • Diversity Antennas
    • Front-Facing Camera
    • The STL files for the FPV Mount are at the link below:https://www.dropbox.com/s/oa6e6ezud3s62iz/KH368_FPV.zip?dl=0 Syma X5c ~$35Exercises
    • Hovering above the ground effect
    • Nose Out
    • Circle of Death
    • Nose In
    • The ROVA Selfie Drone (By IOTGroup) ~$150What you get in the box:
    • ROVA Drone
    • 2 x 2s (7.4v) 1200mAh battery
    • USB Charger
    • Carrying Case
    • 16GB SD Card
    • What is it?
    • a phone-controlled drone (iOS or Android)
    • Connects via WiFi (Password 00000000)
    • 8 Minutes of flight
    • Forward-Facing Camera + Downward facing camera (12MP/5MP)
    • These show notes have been truncated due to length. For the full show notes, visit https://twit.tv/shows/know-how/episodes/368

      Hosts: Fr. Robert Ballecer, SJ and Jason Howell

      Sponsor:

      • casper.com/savings
      • 50 min
      • KH 368: Multirotor 101 - Part III

        Padre and Jason build a FPV system for the ever-popular SYMA system.

        Hosts: Fr. Robert Ballecer, SJ and Jason Howell

        For full show notes, visit https://twit.tv/shows/know-how/episodes/368

        Sponsor:

        • casper.com/savings
        • 50 min
        • KH 367: CES for Your Car, Wrist, and Bottom - Alexa in the car, a smartwatch with month-long battery, and exercising in the office.

          The toys from CES 2018 are starting to arrive in the studio and Patrick/Padre are ready to give you a first look! From Alexa in your vehicle, to a battery that charges your phone AND your car, to a smart watch that only needs to be charged once a month, and a way to exercise in the office, we've got the swag you need to see!

          Roav Vivo ~$50

        • 2 x PowerIQ-equipped USB Ports (Automatically charges at the highest rate)
        • iPhone 7 in 2.2 hours instead of 3.2 hours
        • iPad mini in 3.6 hours instead of 7 hours
        • But the big feature is Amazon Voice Assistant
        • It connects to your Android/iOS phone with Bluetooth 4.1 -- AND then your phone connects to your car
        • It has dual MEMS microphones and a dedicated Noise reduction chip so that it can hear you in a noise car cabin
        • This enables:

        • Hands-free calling
        • Control over ANYTHING in your Amazon voice assistant network
        • 25,000 skills
        • Audio-enabled directions and phone functions
        • Demo

        • App
        • Audio Book
        • Splitsecnd (Split Second) $299

        • Emergency response device (Crash Detection and Response) (Lifetime Coverage)
        • 3G Connectivity
        • GPS with web-based dashboard
        • Integration with Amazon Voice Assistant
        • REAL-TIME location monitoring and geo-fencing
        • Location history
        • Battery backup (can't be stopped by cutting power in accident or theft)
        • Pi-Hole Woes

          - Jason Brown

          "I'm trying to get a better handle on how Pi-Hole works. My wife and I signed up for Hulu's ad-free option. Apparently, some shows aren't part of this agreement, so they give you an ad at the beginning and end of certain shows.

          We just started a show that was supposed to give us those beginning/end ads, but ended up going straight to the show.

          So, do we think that was because of a glitch on Hulu, or did Pi-Hole just do it's job? Every browser-based ad-blocker always gave us a blank nag screen for 30 seconds. But that didn't happen this time. So it feels like the nature of 'ad-free Hulu ads' might be different than the normal ones.

          There's so much going on with ad-blockers and anti-ad-blockers, that it's hard to keep up with. So I'd love it if someone more versed in the subject could provide a simple primer.

          What I know (I think) is that ad-blockers only affect 3rd party ads. But natively hosted ads aren't typically affected. So is this some weird case where Hulu has such an indirect connection to the ads that I was able to skip them entirely?

          I want to try to educate others about ad-blockers, and how different types of ads are affected. But I don't want to regurgitate misinformation."

          How do Browser-Based Ad-Blockers work?

        • As content is loaded into a browser, it looks at the incoming page and removes (or replaces) known ad-scripts AND sites that are known to serve ads.
        • This means your ad-blocking experience will depend on them updating their script and site list.
        • How does Pi-Hole work?

        • It's not looking at scripts at all. (Not enough power)
        • It's only looking at the DNS requests coming from and computer configured to request sites THROUGH the Pi-Hole
        • This means it can't stop native requests (unless specifically black-listed)
        • Roav C2 Dash Cam ~$60

        • 1080p sensor with a 145 degree f2 wide-angle lens
        • WDR Sony Exmore IMX323 sensor with Wide Dynamic Range and nigh-vision capabilities
        • Steel frame for temp-resistance
        • Internal battery
        • 3" LCD screen
        • SD card slot
        • G-force sensor (for
        • Loopi
        • These show notes have been truncated due to length. For the full show notes, visit https://twit.tv/shows/know-how/episodes/367

          Hosts: Fr. Robert Ballecer, SJ and Patrick Delahanty

          Sponsors:

          • Ring.com/KNOWHOW
          • ITPro.TV/knowhow - use the code KNOWHOW30
          • 1 hr 7 min
          • KH 367: CES for Your Car, Wrist, and Bottom

            Alexa in the car, a smartwatch with month-long battery, and exercising in the office.

            Hosts: Fr. Robert Ballecer, SJ and Patrick Delahanty

            For full show notes, visit https://twit.tv/shows/know-how/episodes/367

            Sponsors:

            • RING.COM/KnowHow
            • ITPro.TV/knowhow - use the code KNOWHOW30
            • 1 hr 7 min
            • KH 366: Cable Management (Burke in a Box!) - Practical products for organizing your tangle of cables.

              Are you tired of the rat's nest of cables under, over and through your desk, nightstand, and counter? Well so are we! In this cableriffic episode of Know How, Padre & Megan Morrone show you some practical products for organizing your tangle of cables... Then we show you how Burke would handle it! Add in some of Megan's favorite speakers from CES 2018, and you've got a fun-for-the-whole-family episode of Know How! (And Burke in a Box)

              Megan's Cable Cubby hole!

            • BEFORE IMAGE
            • Pre-Fab from Amazon. G.U.S Brand
            • The Burke Box made from a Desk Organizer
            • Row of Binder Clips
            • USB Wall Outlet
            • Portable Chargers Galore
            • Padre's Cable Managment Mess!

              First, get yourself some braided cables!

              (Fancer) 10-pack of 3' USB-C Cables

            • 3 feet
            • Nylon Braided
            • (Unisame) 6-pack of 6' USB-C Cables

            • 6 feet
            • Nylon Braided


            • You're also going to need a good charger

              Anker Premium 60W Wall Charger

            • 5 Ports (4 x USB, 1 x USB-C)
            • Can deliver 60W
            • Anker 60W 10-port USB Wall Charger

            • 10 Ports
            • 60 Watts


            • The KH CabMan!

            • Anker Premium 60W Wall Charger
            • M3 Hex Nut Set (Need 4x28mm Screws, 4xNuts, 2x12mm Screws
            • STL Files can be found at the link below:
            • https://www.dropbox.com/s/djl147nxobplerm/KH366_CabMan.zip?dl=0
            • Here's the Tinkercad page so you can edit it yourself!


              https://www.tinkercad.com/things/6611SapRUyD-cabmanv3/editv2

              Some Stuff from CES

              Dumb Speakers from x-mini because sometimes you don't want your Bluetooth speaker to listen to your living room.

              X-Mini Supa

            • Oldschool design with one button.
            • Pair with your phone or use an Aux cable or the MicroSD card reader in the back.
            • 10W speakers.
            • pre-set EQ (on the back)
            • Pros - Sound, Design
            • Cons - Weight, a little hard to adjust the volume.
            • X-Mini Infiniti

            • Great sound for different places in your living room, at a price.
            • Four speakers and a sub-woofer.
            • 360 degree sound.
            • If you like the design of the Amazon Echo, you'll like this.
            • X-Mini announced several new products at CES that will come out in June.
            • X-mini INFINITI S will offer 3D surround sound and a removable leather carry strap
            • X-mini EVOLVE 2 is the second-generation wireless hybrid speaker headphones with aptX technology for improved audio and video synchronization over Bluetooth
            • Waterproof speakers
            • These show notes have been truncated due to length. For the full show notes, visit https://twit.tv/shows/know-how/episodes/366

              Hosts: Fr. Robert Ballecer, SJ and Megan Morrone

              45 min
            • KH 365: MultiRotor 101 - Part 2 - Prop balancing, InSpectre, and the Nebula Capsule projector.

              Want an easy-to-use tool to see how vulnerable you are to Meltdown and Spectre? Tired of "Jello" videos from your drone? Feel like building the 2018 Alien-X? Need a soda-can sized, Android-powered pico projector will full-size features? -- Padre and Jason have the answer to all of these questions on this flu-ridden episode of "Know How"!

              InSpectre

            • Written in Assembly by Steve Gibson
            • Only 125k (would have been much less except he had to include a picture to make it a legit Win10 app)
            • NO INSTALLATION (Runs directly from the executable)
            • Will examine your vulnerability to both Meltdown and Spectre
            • MAY cause false positives with AV suites b/c it allows you to enable/disable protection (malware behavior)
            • Prop Balancing


              Unbalanced props are the #1 reason for "jello" video.

            • They can also cause premature wear on the multi-rotor's motors and frame
            • Not to mention that the excessive vibration can cause innacuracies in the FC's sensors
            • Spinning at a few thousand times per second can turn even a small imbalance into a major vibration

              So what we need to do is to balance the prop so that weight is as equally spread around the blades (and hub) as possible

              Tools and Materials:

            • A prop balancer
            • The Du-Bro 499 Tru-Spin Prop Balancer
            • Level
            • Plastic Bubble Ruler
            • Tape or Sandpaper
            • Procedure:

            • Assemble the Prop Balancer
            • Place the prop balancer on a level surface, then level the prop balancer with your bubble ruler.
            • Mount the prop on the beam, making sure that it's snug in the holder. Turning the prop should turn the beam and vice-versa. -- If the prop isn't properly secured, it will wobble, which will invalidate the balancing.
            • Place the beam between the arms of the balancer, making sure that it freely turns.
            • Spin the prop/beam assembly and watch for wobbles. If it wobbles, the prop isn't properly secured.
            • Set the prop so that both blades are equal distances from the table surface, then release.
            • The heavier side of the prop will fall.
            • Add tape to the lighter blade, or sand the heavier blade. -- Repeat the test.
            • I prefer to add no more than 2 pieces of tape, always on the underside of the blade.
            • When you can position the prop in any position and it stays in that position, then it's balanced.
            • It's possible that the HUB is unbalanced. If so, you'll notice that the prop tends to balance with the heavier side of the hub down.
            • If that's the case, you can sand the heavier part of the hub.
            • Alien-X

              Procedure:

            • Power up Craft
            • Enter "Receiver Test" on Flight Controller
            • Test all inputs. Reverse channels and/or swap cables as needed
            • Set Subtrims
            • Set motor layout to "QuadCopter X"
            • Calibrate ACC
            • In "Mode" set "Self-Level" to "AUX"
            • In "Self-Level" set P to 30 and I to 20
            • Check motor rotation. Flip pairs as needed
            • Calibrate ESCs
            • Install props
            • Balance Center of Gravity
            • Syma X5c


              Exercises

            • Hovering above the ground effect
            • Nose Out
            • Circle of Death
            • Nose In
            • Nebula Capsule

            • DLP 100 Lumen (30,000 hours)
            • 854 x 480 Resolution
            • 4 Hours Battery Life
            • 360 Sound (has Bluetooth conenctivity)
            • Can be controlled via a phone)
            • Android 7.1
            • 1 lb
            • Input: Wireless, HDMI, USB, Bluetooth
            • Up to 100" size (Really best around 30")
            • AutoKeystone
            • These show notes have been truncated due to length. For the full show notes, visit https://twit.tv/shows/know-how/episodes/365

              Hosts: Fr. Robert Ballecer, SJ and Jason Howell

              Sponsor:

              • WordPress.com/knowhow
              • 57 min
              • KH 365: MultiRotor 101 - Part 2

                Prop balancing, InSpectre, and the Nebula Capsule projector.

                Hosts: Fr. Robert Ballecer, SJ and Jason Howell

                For full show notes, visit https://twit.tv/shows/know-how/episodes/365

                Sponsor:

                • WordPress.com/knowhow
                • 57 min
                • KH 364: You Feeling Lucky? - NMAP, RasPi, Nerf, Lazer Tag, IR, and more...

                  Fr. Robert Ballecer and Patrick Delahanty show you how to can get information about all the devices on your network, how to turn a Raspberry Pi into a Wi-Fi router, solving filament problems in a 3D printer, and modifying Nerf and Lazer Tag guns.

                  Nmap Me

                  "I started a search for a software interrogation program to show all the information about the devices on my network. My search returned some results. But my nerve ending stood on high alert as I started reading about the options within some software available. I was turned off by Wireshark and its complexity. (No disrespect intended to the Wireshark community) Decided a better road traveled would be asking; Has anyone had any experience with this type software and the trust level(from usage)?" - Rud Dog

                  Fing (Android & iOS)

                • Basic Networking Mapping
                • Can do pings & traceroute
                • NMAP (Windows, macOS, Linux)

                • nmap is an open source network tool/port scanner that can scan everything from a large network to a single host
                • It uses raw IP packets to let us know what hosts are available on a network, what ports they have open, what OS they are running and dozens of other parameters available to those who are willing to dive into the network protocols.
                • Quick Notes:

                  Basic Commands

                • When you install NMAP on Windows, its going to install "WinPcap" service (Windows Packet Capture) service -- Allow the install and let it run on startup.
                • I'm running all these commands in a shell that has root
                • There's a GUI, but I prefer the command line
                • Discover all IPs in a subnet
                • "nmap -sP x.x.x.x/y" (This is a "ping scan")
                • Where 'x.x.x.x' is the IPv4 address of the subnet you want to scan
                • Where 'y' is the size of your address space
                • For example: If I use "ipconfig /all" to determine that I have an address of 192.168.0.76 and a mask of 255.255.255.0
                • I know my subnet is 192.168.0.0
                • My subnet size is /24
                • so I would use the command "nmap -sP 192.168.0.0/24"
                • You can also use wildcards and ranges (Ex: "nmap 192.168.1.1-50" or "nmap 192.168.1.*")
                • This tells nmap to send a icmp echo request to ports 443, and 80 to all addresses within the specified subnet.
                • This only gives us a list of devices that respond to that request
                • NOTE: Just because a device doesn't respond, that doesn't mean it's not there.
                • Identify Hostnames
                • "nmap -sL x.x.x.x/y"
                • This will send a packet to all the hosts in the range and return their reported network names
                • Identify the Operating System
                • "nmap -O x.x.x.x"
                • This will attempt to identify the OS of the host
                • Scanning for Open Ports on a specific host
                • "nmap x.x.x.x"
                • This will look at a specific host and tell you what ports are open on that host
                • Show Host Interface and Routes
                • "nmap --iflist"
                • Verbose!
                • Add "-v" to find out what's happening
                • Saving your scan to a text file
                • "nmap 'whatever you choose to do' > output.txt
                • RasPi WiFi Router

                  "I've made a recent post about using a raspberry pi as a tor box and I figured that I don't need the tor part. So does anyone know how to turn a raspberry pi into a WiFi router on raspbian. Any support will be great!!" - Michael

                  Turning a Raspberry Pi into a Wireless AP

                • Image Raspbian onto your SD card
                • Expand the volume
                • Open Terminal
                • "sudo raspi-config"
                • Select option 7
                • Select A1
                • Change the default password
                • Select option 1
                • RasPi will reboot
                • Turn your RasPi into an Access Point
                • A GIT user by
                • Fil

                  These show notes have been truncated due to length. For the full show notes, visit https://twit.tv/shows/know-how/episodes/364

                  Hosts: Fr. Robert Ballecer, SJ and Patrick Delahanty

                  Sponsors:

                  • thetrackr.com/knowhow
                  • eero.com code KNOWHOW
                  • 1 hr 1 min

                  About Know How... (Audio)

                  From the publisher's feed

                  Get your gaming on! Jason Howell and Ars Technica's Sam Machkovech bring you 12 episodes and cover it all, from tips and tricks, consoles, gaming rigs, controllers, Virtual Reality, classic gaming, live gameplay, mobile gaming, console hacking, and more! Plus, they'llย wrap up with a holiday game guide.

                  More shows like Know How... (Audio)

                  This Week in YouTube (Audio) by TWiT

                  This Week in YouTube (Audio)

                  9 Listeners

                  Trey's Variety Hour (Video) by TWiT

                  Trey's Variety Hour (Video)

                  34 Listeners

                  This Week in Law (Audio) by TWiT

                  This Week in Law (Audio)

                  109 Listeners

                  This Week in Law (Video) by TWiT

                  This Week in Law (Video)

                  6 Listeners

                  The Giz Wiz (Audio) by Dick DeBartolo & Chad Johnson

                  The Giz Wiz (Audio)

                  139 Listeners

                  The Giz Wiz (HD Video) by Dick DeBartolo & Chad Johnson

                  The Giz Wiz (HD Video)

                  29 Listeners

                  Dr. Kiki's Science Hour (Audio) by TWiT

                  Dr. Kiki's Science Hour (Audio)

                  96 Listeners

                  Maxwell's House (Audio) by TWiT

                  Maxwell's House (Audio)

                  35 Listeners

                  Jumping Monkeys (Audio) by TWiT

                  Jumping Monkeys (Audio)

                  72 Listeners

                  Ham Nation by Josh Nass

                  Ham Nation

                  116 Listeners

                  This Week in Enterprise Tech (Audio) by TWiT

                  This Week in Enterprise Tech (Audio)

                  94 Listeners

                  net@night (Video) by TWiT

                  net@night (Video)

                  24 Listeners

                  The New Screen Savers (Audio) by TWiT

                  The New Screen Savers (Audio)

                  50 Listeners

                  Coding 101 (Audio) by TWiT

                  Coding 101 (Audio)

                  15 Listeners

                  Futures in Biotech (Video) by TWiT

                  Futures in Biotech (Video)

                  10 Listeners

                  Padre's Corner (Video) by TWiT

                  Padre's Corner (Video)

                  9 Listeners

                  FourCast (Audio) by TWiT

                  FourCast (Audio)

                  0 Listeners

                  Ask The Tech Guy (Audio) by TWiT

                  Ask The Tech Guy (Audio)

                  28 Listeners

                  Hands-On Photography (Audio) by TWiT

                  Hands-On Photography (Audio)

                  31 Listeners

                  Ask The Tech Guy (Video) by TWiT

                  Ask The Tech Guy (Video)

                  0 Listeners