Support the show (https://www.paypal.me/plasticmodelmojo)

Mojo Miscellaneous

Mike and Dave  recap an excellent experience at the 2021 IPMS National Convention in Las Vegas, NV.  Listen in as they bounce back and forth between the studio and live from the vendor room floor.  PMM spoke with a variety of attendees and got some interesting perspectives and content.    A great time was had, which should be quite obvious from this episode.


Plastic Model Mojo is brought to you by  Model Paint Solutions !  Check out John Miller's site for the best in airbrushing, both equipment and tips of the trade.



Mail Bag!
Join the Mail Bag my emailing the show at [email protected] or sending us a message via Facebook Messenger system from the Plastic Model Mojo Facebook page.  If you do, please tell us where you are from.  We like to know!

Countdown to Vegas:
2021 IPMS USA National Convention Web Site
2021 IPMS USA National Convention Trophy Sponsorships


More Podcast Goodness to get you through the week!
Finally, please have a listen and subscribe to our fellow podcasts in the scale model space. We all have our own take on the hobby and enjoy cooperating with each other for our mutual success.  Collectively, we are bringing you about 16 hours of content a month.

Check out all the podcasts in the modelsphere here:
http://modelpodcasts.com/

And some Vlog and Blog Action for you as well!
Chris Wallace's "Model Airplane Maker"
Steven Lee's "Sprue Pie with Frets"
Jim Bates' "A Scale Canadian TV"
Jeff Groves' "Inch High Guy"

Give us your Feedback!
Rate the Show!

Support the Show!
Patreon
Buy Me a Beer
Paypal

Bump Riffs Graciously Provided by Ed Baroth
Ad Reads Generously Provided by Bob "The Voice of Bob" Bair

Mike and Kentucky Dave thank each and everyone of you for participating on this journey with us.  

Support the show (https://www.paypal.me/plasticmodelmojo)

Mojo Miscellaneous

Mike and Dave host several guest in the warm up to the 2021 IPMS National Convention in Las Vegas, Nevada. 

First up is John Miller of Model Paint Solutions (aka Dr. Strangebrush). John provides some of the details for the seminars he will be hosting at the national convention. In addition, John helps kick off our solicitation of listener questions about airbrushing and decaling.  These questions will be collected and used as the topics for the next full installment of "Dr Strangebrush" in an upcoming episode.

Up next is National Convention Chairman, Bob Lomassaro.  Bob shares the final status of the show run up and what we hope to see for the national convention.

Finally, the guys from the Plastic Posse Podcast drop in and share some thoughts on the show, as well as what we all hope to experience, and not to mention a few good laughs.

If you make it to Vegas... stop by and see us!

Plastic Model Mojo is brought to you by  Model Paint Solutions !  Check out John Miller's site for the best in airbrushing, both equipment and tips of the trade.



Mail Bag!
Join the Mail Bag my emailing the show at [email protected] or sending us a message via Facebook Messenger system from the Plastic Model Mojo Facebook page.  If you do, please tell us where you are from.  We like to know!

Countdown to Vegas:
2021 IPMS USA National Convention Web Site
2021 IPMS USA National Convention Trophy Sponsorships


More Podcast Goodness to get you through the week!
Finally, please have a listen and subscribe to our fellow podcasts in the scale model space. We all have our own take on the hobby and enjoy cooperating with each other for our mutual success.  Collectively, we are bringing you about 16 hours of content a month.

Check out all the podcasts in the modelsphere here:
http://modelpodcasts.com/

And some Vlog and Blog Action for you as well!
Chris Wallace's "Model Airplane Maker"
Steven Lee's "Sprue Pie with Frets"
Jim Bates' "A Scale Canadian TV"
Jeff Groves' "Inch High Guy"

Give us your Feedback!
Rate the Show!

Support the Show!
Patreon
Buy Me a Beer
Paypal

Bump Riffs Graciously Provided by Ed Baroth
Ad Reads Generously Provided by Bob "The Voice of Bob" Bair

Mike and Kentucky Dave thank each and everyone of you for participating on this journey with us.  

Support the show (https://www.paypal.me/plasticmodelmojo)

Mojo Miscellaneous

Mike and Dave touch on a number of topics, including the Moosaroo Cup,  their response to a recent IPMS-USA Facebook page post regarding podcast length, and finally a bit of conversation on how they each approach a project.

Plastic Model Mojo is brought to you by  Model Paint Solutions !  Check out John Miller's site for the best in airbrushing, both equipment and tips of the trade.



Mail Bag!
Join the Mail Bag my emailing the show at [email protected] or sending us a message via Facebook Messenger system from the Plastic Model Mojo Facebook page.  If you do, please tell us where you are from.  We like to know!

Countdown to Vegas:
2021 IPMS USA National Convention Web Site
2021 IPMS USA National Convention Trophy Sponsorships


More Podcast Goodness to get you through the week!
Finally, please have a listen and subscribe to our fellow podcasts in the scale model space. We all have our own take on the hobby and enjoy cooperating with each other for our mutual success.  Collectively, we are bringing you about 16 hours of content a month.

Check out all the podcasts in the modelsphere here:
http://modelpodcasts.com/

And some Vlog and Blog Action for you as well!
Chris Wallace's "Model Airplane Maker"
Steven Lee's "Sprue Pie with Frets"
Jim Bates' "A Scale Canadian TV"
Jeff Groves' "Inch High Guy"

Give us your Feedback!
Rate the Show!

Support the Show!
Patreon
Buy Me a Beer
Paypal

Bump Riffs Graciously Provided by Ed Baroth
Ad Reads Generously Provided by Bob "The Voice of Bob" Bair

Mike and Kentucky Dave thank each and everyone of you for participating on this journey with us.  

Support the show (https://www.paypal.me/plasticmodelmojo)

A Chat with the Panzermeister:

Mike and Dave have a nice conversation with Mr. Evan McCallum aka "Panzermeister36" of YouTube fame.  If you are an armor builder and unfamiliar with Evans's content, you should check it out here:

Panzermeister36

Plastic Model Mojo is brought to you by  Model Paint Solutions !  Check out John Miller's site for the best in airbrushing, both equipment and tips of the trade.



Mail Bag!
Join the Mail Bag my emailing the show at [email protected] or sending us a message via Facebook Messenger system from the Plastic Model Mojo Facebook page.  If you do, please tell us where you are from.  We like to know!

Countdown to Vegas:
2021 IPMS USA National Convention Web Site
2021 IPMS USA National Convention Trophy Sponsorships


More Podcast Goodness to get you through the week!
Finally, please have a listen and subscribe to our fellow podcasts in the scale model space. We all have our own take on the hobby and enjoy cooperating with each other for our mutual success.  Collectively, we are bringing you about 16 hours of content a month.

Check out all the podcasts in the modelsphere here:
http://modelpodcasts.com/

And some Vlog and Blog Action for you as well!
Chris Wallace's "Model Airplane Maker"
Steven Lee's "Sprue Pie with Frets"
Jim Bates' "A Scale Canadian TV"
Jeff Groves' "Inch High Guy"

Give us your Feedback!
Rate the Show!

Support the Show!
Patreon
Buy Me a Beer
Paypal

Bump Riffs Graciously Provided by Ed Baroth
Ad Reads Generously Provided by Bob "The Voice of Bob" Bair

Mike and Kentucky Dave thank each and everyone of you for participating on this journey with us.  

Support the show (https://www.paypal.me/plasticmodelmojo)

Sprue Pie a la Mojo:

Mike and Dave have a chat with Blogger Stephen Lee, author of "Sprue Pie with Frets"

Plastic Model Mojo is brought to you by  Model Paint Solutions !  Check out John Miller's site for the best in airbrushing, both equipment and tips of the trade.



Mail Bag!
Join the Mail Bag my emailing the show at [email protected] or sending us a message via Facebook Messenger system from the Plastic Model Mojo Facebook page.  If you do, please tell us where you are from.  We like to know!

Countdown to Vegas:
2021 IPMS USA National Convention Web Site
2021 IPMS USA National Convention Trophy Sponsorships


More Podcast Goodness to get you through the week!
Finally, please have a listen and subscribe to our fellow podcasts in the scale model space. We all have our own take on the hobby and enjoy cooperating with each other for our mutual success.  Collectively, we are bringing you about 12 hours of content a month.

On the Bench
Web: https://otbmodellerspodcast.libsyn.com/
Facebook: https://www.facebook.com/On-the-Bench-817919571710526/

Scale Model Podcast
Web:  https://scalemodelpodcast.com/
Facebook: https://www.facebook.com/ScaleModelPodcast/

Plastic Posse Podcast
Web: Plastic Posse Podcast
Facebook: https://www.facebook.com/PlasticPosse/

Just Making Conversation
Web (Spotify): Just Making Conversation
Facebook: https://www.facebook.com/justmakingconversation

Model Geeks Podcast
Web: Model Geeks

And some Vlog and Blog Action for you as well!
Chris Wallace's "Model Airplane Maker"
Steven Lee's "Sprue Pie with Frets"
Jim Bates' "A Scale Canadian TV"
Jeff Groves' "Inch High Guy"

Give us your Feedback!
Rate the Show!

Support the Show!
Patreon
Buy Me a Beer
Paypal

Bump Riffs Graciously Provided by Ed Baroth
Ad Reads Generously Provided by Bob "The Voice of Bob" Bair

Mike and Kentucky Dave thank each and everyone of you for participating on this journey with us.  

Support the show (https://www.paypal.me/plasticmodelmojo)

Getting Mojo at Wonderfest

Mike and Dave head off to Wonderfest, the epic Sci-Fi and Fanatasy scale modeling show in their own backyard!

Plastic Model Mojo is brought to you by  Model Paint Solutions !  Check out John Miller's site for the best in airbrushing, both equipment and tips of the trade.

Episode 40's "Favs and Yawns" segment is brought to you by Horizon Models.  Check our their great deal for commemorating the Mercury program.

Check out Bulldog Models for some great 3-D printed benchtop accessories.

Here is the link to the 3-D printed Royal Navy turret and catpult... awesome!

Mail Bag!
Join the Mail Bag my emailing the show at [email protected] or sending us a message via Facebook Messenger system from the Plastic Model Mojo Facebook page.  If you do, please tell us where you are from.  We like to know!

Countdown to Vegas:
2021 IPMS USA National Convention Web Site
2021 IPMS USA National Convention Trophy Sponsorships


More Podcast Goodness to get you through the week!
Finally, please have a listen and subscribe to our fellow podcasts in the scale model space. We all have our own take on the hobby and enjoy cooperating with each other for our mutual success.  Collectively, we are bringing you about 12 hours of content a month.

On the Bench
Web: https://otbmodellerspodcast.libsyn.com/
Facebook: https://www.facebook.com/On-the-Bench-817919571710526/

Scale Model Podcast
Web:  https://scalemodelpodcast.com/
Facebook: https://www.facebook.com/ScaleModelPodcast/

Plastic Posse Podcast
Web: Plastic Posse Podcast
Facebook: https://www.facebook.com/PlasticPosse/

Just Making Conversation
Web (Spotify): Just Making Conversation
Facebook: https://www.facebook.com/justmakingconversation

Model Geeks Podcast
Web: Model Geeks

And some Vlog and Blog Action for you as well!
Chris Wallace's "Model Airplane Maker"
Steven Lee's "Sprue Pie with Frets"
Jim Bates' "A Scale Canadian TV"
Jeff Groves' "Inch High Guy"

Give us your Feedback!
Rate the Show!

Support the Show!
Patreon
Buy Me a Beer
Paypal

Bump Riffs Graciously Provided by Ed Baroth
Ad Reads Generously Provided by Bob "The Voice of Bob" Bair

Mike and Kentucky Dave thank each and everyone of you for participating on this journey with us.  

Support the show (https://www.paypal.me/plasticmodelmojo)

Listener Confessions... or More Goofs, Gaffs, & Blunders

Mike and Dave share the best Listener submitted Goofs, Gaffs, and Blunders.  As they say,  success is built on a  mountain of failure.

Plastic Model Mojo is brought to you by  Model Paint Solutions !  Check out John Miller's site for the best in airbrushing, both equipment and tips of the trade.

Episode 39's "What Broke Your Wallet" segment is brought to you by Horizon Models.  Check our their great deal for commemorating the Mercury program.

Check out Bulldog Models for some great 3-D printed benchtop accessories.

Here is the link to the 3-D printed Royal Navy turret and catpult... awesome!

Mail Bag!
Join the Mail Bag my emailing the show at [email protected] or sending us a message via Facebook Messenger system from the Plastic Model Mojo Facebook page.  If you do, please tell us where you are from.  We like to know!

Countdown to Vegas:
2021 IPMS USA National Convention Web Site
2021 IPMS USA National Convention Trophy Sponsorships


More Podcast Goodness to get you through the week!
Finally, please have a listen and subscribe to our fellow podcasts in the scale model space. We all have our own take on the hobby and enjoy cooperating with each other for our mutual success.  Collectively, we are bringing you about 12 hours of content a month.

On the Bench
Web: https://otbmodellerspodcast.libsyn.com/
Facebook: https://www.facebook.com/On-the-Bench-817919571710526/

Scale Model Podcast
Web:  https://scalemodelpodcast.com/
Facebook: https://www.facebook.com/ScaleModelPodcast/

Plastic Posse Podcast
Web: Plastic Posse Podcast
Facebook: https://www.facebook.com/PlasticPosse/

Just Making Conversation
Web (Spotify): Just Making Conversation
Facebook: https://www.facebook.com/justmakingconversation

Model Geeks Podcast
Web: Model Geeks

And some Vlog and Blog Action for you as well!
Chris Wallace's "Model Airplane Maker"
Steven Lee's "Sprue Pie with Frets"
Jim Bates' "A Scale Canadian TV"
Jeff Groves' "Inch High Guy"

Give us your Feedback!
Rate the Show!

Support the Show!
Patreon
Buy Me a Beer
Paypal

Bump Riffs Graciously Provided by Ed Baroth
Ad Reads Generously Provided by Bob "The Voice of Bob" Bair

Mike and Kentucky Dave thank each and everyone of you for participating on this journey with us.  

Support the show (https://www.paypal.me/plasticmodelmojo)

T-34 Shock... The Soviet Legend in Pictures

Authors Francis Pulham and William Kerrs join Dave and Mike to offer details surrounding their pending publication.  Drawing heavily on wartime snapshots taken by curious German soldiers, most all previously unpublished, T-34 shock promises to be the most comprehensive work on the T-34 to date.  The authors also discuss the very modeler/historian-centric naming nomenclature they have created to better describe the factory and production variations that encompass the technical history of this iconic battle tank.

John Miller's Model Paint Solutions is now a sponsor of Plastic Model Mojo

Mail Bag!
Join the Mail Bag my emailing the show at [email protected] or sending us a message via Facebook Messenger system from the Plastic Model Mojo Facebook page.  If you do, please tell us where you are from.  We like to know!

Countdown to Vegas:
2021 IPMS USA National Convention Web Site
2021 IPMS USA National Convention Trophy Sponsorships


More Podcast Goodness to get you through the week!
Finally, please have a listen and subscribe to our fellow podcasts in the scale model space. We all have our own take on the hobby and enjoy cooperating with each other for our mutual success.  Collectively, we are bringing you about 12 hours of content a month.

On the Bench
Web: https://otbmodellerspodcast.libsyn.com/
Facebook: https://www.facebook.com/On-the-Bench-817919571710526/

Scale Model Podcast
Web:  https://scalemodelpodcast.com/
Facebook: https://www.facebook.com/ScaleModelPodcast/

Plastic Posse Podcast
Web: Plastic Posse Podcast
Facebook: https://www.facebook.com/PlasticPosse/

Just Making Conversation
Web (Spotify): Just Making Conversation
Facebook: https://www.facebook.com/justmakingconversation

Model Geeks Podcast
Web: Model Geeks

And some Vlog and Blog Action for you as well!
Chris Wallace's "Model Airplane Maker"
Steven Lee's "Sprue Pie with Frets"
Jim Bates' "A Scale Canadian TV"
Jeff Groves' "Inch High Guy"

Give us your Feedback!
Rate the Show!

Support the Show!
Patreon
Buy Me a Beer
Paypal

Bump Riffs Graciously Provided by Ed Baroth
Ad Reads Generously Provided by Bob "The Voice of Bob" Bair

Mike and Kentucky Dave thank each and everyone of you for participating on this journey with us.  

Support the show (https://www.paypal.me/plasticmodelmojo)

Dr. Strangebrush returns to Plastic Model Mojo for more great airbrush discussion!

John Miller's Model Paint Solutions is now a sponsor of Plastic Model Mojo

Mail Bag!
Join the Mail Bag my emailing the show at [email protected] or sending us a message via Facebook Messenger system from the Plastic Model Mojo Facebook page.  If you do, please tell us where you are from.  We like to know!

Countdown to Vegas:
2021 IPMS USA National Convention Web Site
2021 IPMS USA National Convention Trophy Sponsorships


More Podcast Goodness to get you through the week!
Finally, please have a listen and subscribe to our fellow podcasts in the scale model space. We all have our own take on the hobby and enjoy cooperating with each other for our mutual success.  Collectively, we are bringing you about 12 hours of content a month.

On the Bench
Web: https://otbmodellerspodcast.libsyn.com/
Facebook: https://www.facebook.com/On-the-Bench-817919571710526/

Scale Model Podcast
Web:  https://scalemodelpodcast.com/
Facebook: https://www.facebook.com/ScaleModelPodcast/

Plastic Posse Podcast
Web: Plastic Posse Podcast
Facebook: https://www.facebook.com/PlasticPosse/

Just Making Conversation
Web (Spotify): Just Making Conversation
Facebook: https://www.facebook.com/justmakingconversation

Model Geeks Podcast
Web: Model Geeks

And some Vlog and Blog Action for you as well!
Chris Wallace's "Model Airplane Maker"
Steven Lee's "Sprue Pie with Frets"
Jim Bates' "A Scale Canadian TV"
Jeff Groves' "Inch High Guy"

Give us your Feedback!
Rate the Show!

Support the Show!
Patreon
Buy Me a Beer
Paypal

Bump Riffs Graciously Provided by Ed Baroth
Ad Reads Generously Provided by Bob "The Voice of Bob" Bair

Mike and Kentucky Dave thank each and everyone of you for participating on this journey with us.  

Support the show (https://www.paypal.me/plasticmodelmojo)

Mike and Dave camp out at the 2021 Roscoe Turner Invitational.  A little live recorded content peppered in our normal format.   Not our best effort, but we did our best.  Live and Learn.

John Miller's Model Paint Solutions is now a sponsor of Plastic Model Mojo

Mail Bag!
Join the Mail Bag my emailing the show at [email protected] or sending us a message via Facebook Messenger system from the Plastic Model Mojo Facebook page.  If you do, please tell us where you are from.  We like to know!

Countdown to Vegas:
2021 IPMS USA National Convention Web Site
2021 IPMS USA National Convention Trophy Sponsorships


More Podcast Goodness to get you through the week!
Finally, please have a listen and subscribe to our fellow podcasts in the scale model space. We all have our own take on the hobby and enjoy cooperating with each other for our mutual success.  Collectively, we are bringing you about 12 hours of content a month.

On the Bench
Web: https://otbmodellerspodcast.libsyn.com/
Facebook: https://www.facebook.com/On-the-Bench-817919571710526/

Scale Model Podcast
Web:  https://scalemodelpodcast.com/
Facebook: https://www.facebook.com/ScaleModelPodcast/

Plastic Posse Podcast
Web: Plastic Posse Podcast
Facebook: https://www.facebook.com/PlasticPosse/

Just Making Conversation
Web (Spotify): Just Making Conversation
Facebook: https://www.facebook.com/justmakingconversation

Model Geeks Podcast
Web: Model Geeks

And some Vlog and Blog Action for you as well!
Chris Wallace's "Model Airplane Maker"
Steven Lee's "Sprue Pie with Frets"
Jim Bates' "A Scale Canadian TV"
Jeff Groves' "Inch High Guy"

Give us your Feedback!
Rate the Show!

Support the Show!
Patreon
Buy Me a Beer
Paypal

Bump Riffs Graciously Provided by Ed Baroth
Ad Reads Generously Provided by Bob "The Voice of Bob" Bair

Mike and Kentucky Dave thank each and everyone of you for participating on this journey with us.