Running an R32 GTR transfer box off the back of a Holinger RD6, Winters Quick Change rear differential, Haltech R5 NEXUS ECU/PDM,  Garrett 94mm OR 106mm turbo, Clearview oil filtration system along with Ti Automotive a dual brushless pump setup among a long list of other parts, we caught up with Rob Dahm at @semashow to discuss his ever-evolving and now essentially complete FD RX7 quad rotor build.

Use ‘PODCAST75’ for $75 off your first HPA course here: https://hpcdmy.co/hpa-tuned-in

The Haltech R5 doesn't just handle engine management; the built-in PDM also controls many of the electrical components leaving the car without fuses or relays. A standalone ECUMaster PMU splits this duty in 2 adding redundancy plus more inputs and outputs. A FuelTech FTSpark Capacitive Discharge Ignition (CDI) also helps in the ignition department. Interestingly this build draws up to 80amps, and as you can see (and hear) Rob has made sure that isn't an issue with this setup.

Traction control is also handled by the Haltech R5 via a Nissan ATTESA-based control system and some 'fettling' by Rob which allows him to demand a dynamic or set torque ratio between the front and rear of the car allowing for versatility when launching and cornering across many surface conditions. We also touch on some Nikasil-style coating that is used to make sure aluminium and steel alloys play together nicely. Interestingly the engine is clearanced specifically for Valvoline 20-50 oil which shows the level of detail this build has reached. 

The long list of topics continues with Precision Engineering eccentric shafts, rotary irons, apex seals, 16-point total TPMS (tyre pressure monitoring system) and the gremlins auxiliary systems can cause a rotary engine.

Last time we spoke to Rob he mentioned his interest in more A-B testing, and he has followed through on this and discussed some poor injector placement and cooling issues that upon investigation and data collection he has resolved often by taking it upon himself to learn the skills to do the job himself. Machine work, wiring and tuning are just a few skills he has picked up as a direct result of this build.

Want to learn how to tune EFI? Start here instantly, and for free: https://hpcdmy.co/tuneb