Know How... (Audio)
Download on the App Store

Know How... (Audio) episodes

  • KH 284: One Phone To Do It All

    ChatSIM allows you to travel without worrying about cell networks, why the OnePlus 3t is Padre's do it all phone, and the Feiyu Tech handheld gimbal.

    Hosts: Fr. Robert Ballecer, SJ and Bryan Burnett

    Connect with us!

    • Don't forget to check out our large library of projects at https://twit.tv/shows/know-how.
    • Join our Google+ Community.
    • Tweet at us at @PadreSJ, @Cranky_Hippo, and @Anelf3.

    Thanks to CacheFly for the bandwidth for this show.

    41 min
  • KH 283: Growduino Part III

    We go over the basic operation of our Growduino system, what is an RTC and why we need one for this project, and learn how to program an Arduino to schedule when to turn on and off the watering system.


    Problem:
    An Arduino's memory is wiped when it loses power. For most of our projects, that doesn't matter b/c we're only using the Arduino as a momentary I/O controller. However, when we have a project that needs to be persistent, we need a way to keep time even when the Arduino is powered off.

    Segment Summary:
    We're going to connect a Tiny RTC to an Arduino.

    Parts:
    1. Tiny RTC I2C DS1307 Real Time Clock ~$1.50
    2. Arduino
    3. Jumper Wires

    Tools:
    1. Soldering Kit


    What is I2C?
    * I2C (Pronounced "I Squared C") can communicate with multiple devices over short distances with just two wires: SDA (Data Line) & SCL (Clock Line)
    * Technically, it's a "Multi-Master, Multi-Slave, Single-Ended, Serial bus"

    You need to know what are the SCL and SDA pins on your arduino
    * Uno, Nano or clone (SDA = A4 // SCL = A5)
    * Mega (SDA = 20 // SCL = 21)
    * Leonardo (SDA = 2 // SCL = 3)
    * Due (SDA = 20 // SCL = 21)

    Segment Agenda:
    1. Explain I2C
    2. Solder pins onto the TinyRTC
    3. Connect TinyRTC to Breadboard
    4. Show Output
    5. Set Time
    6. Trigger Relay

    The Code for today's episode can be found HERE

    Hosts: Fr. Robert Ballecer, SJ and Bryan Burnett

    Connect with us!

    • Don't forget to check out our large library of projects at https://twit.tv/shows/know-how.
    • Join our Google+ Community.
    • Tweet at us at @PadreSJ, @Cranky_Hippo, and @Anelf3.

    Thanks to CacheFly for the bandwidth for this show.

    58 min
  • KH 282: Move Your Grow and Repair Syma X5

    We go over the different models of AeroGarden and what models we've been using, how to diagnose your WiFi connectivity issues, and how to repair the Syma X5 Quadcopter!

    Starting and Moving my Grow
    -- Michael B
    "I live just outside of Dallas, Tx and it is time to start my Tomato seeds. You have talked about the Miracle-Grow AeroGarden product on your show and I plan to purchase one. There seem to be several choices, Sprout, Harvest Bounty, Elite, Ultra and Bounty Elite + WIFI, I plan to purchase the Elite and need to know if the WIFI feature is worth the extra cost?"

    We've shown off two AeroGardens on Know How

    AeroGarden Harvest ~$120
    * 6 Pods
    * 20 Watt LED Lighting system (100 full-spectrum LED Grow lights) on an adjustable arm that can give 12" of growing height
    * Automated lighting, irrigation and nutrient delivery
    * Hydroponic
    * Can grow crops up to 5x faster


    AeroGarden Bounty Elite ~$370
    * 45 Watt LED Lighting system
    * 9-pods
    * Touch-Screen


    AeroGarden Bouty Elite Wi-Fi ~$360
    * Same as Bouty Elite + WiFi
    * Adds an App

    WiFi Issues
    -- Robert Short
    "Ok i got one for you all. Need a little help or at least your thoughts. Got a issue with WIFI. on my laptop dell R4110 it will drop WiFi for no reason. I have a Asus RT-N66R router and using the WiFi from the Comcast router. I can switch between routers and reconnect with no issues, i have reloaded drivers and even changed out the pci-e card. Anyone run into this before."

    Intermittent problems SUCK! (So let's do some differential diagnosis)
    1. Try with a different AP (Comcast routers SUCK)
    2. Try with a USB Wireless adapter
    3. Remove all third-party wireless connection management tools

    Hosts: Fr. Robert Ballecer, SJ and Bryan Burnett

    Connect with us!

    • Don't forget to check out our large library of projects at https://twit.tv/shows/know-how.
    • Join our Google+ Community.
    • Tweet at us at @PadreSJ, @Cranky_Hippo, and @Anelf3.

    Thanks to CacheFly for the bandwidth for this show.

    45 min
  • KH 281: The Growduino - Part 2

    Continuing with our Growduino project we go over what relays are and why we need them and begin the basics of coding your Arduino so you can remotely access or schedule automation!

    Relays!
    * A relay is a switch that is toggled electrically
    ** It gives us the ability to turn on and off a circuit with a different circuit
    -- So a 120AC circuit could toggle a 12V DC circuit
    -- A 5V circuit could toggle a 24V circuit

    There are several different TYPES of Relays
    -- Electromagnetic (the most popular)
    -- Optomechanical (Much like EM, but the circuits are COMPLETELY isolated from each other)
    -- Solid State (No moving parts. All switching is done in a semiconductor)

    We're going to be using electromagnetic Relays
    * In the most basic version: a switch is toggled between "on" and "off" by an electromagnetic that physically moves the switch between the two positions

    uxcell HH54P D 12V Coil Relay ~$8
    -- They can be normally open or normally closed, some, like the UXCELL can throw multiple circuits simul

    For our projects, we can use something a little more simple

    Uxcell 12V 5-pin Mini Power Relay ~$7
    * The side of the relay with three pins
    -- The OUTSIDE pins power the electro magnet
    -- The INSIDE pin is the NO/NC pin that links to the other side of the relay
    * The side of the relay with two pins
    -- One is the normally open pin
    -- One is the normally closed pin

    The important part is that we can use a 5-volt circuit to toggle a circuit up to 30v (or 120v AC)

    Demo 1:
    * Relay that is toggled by a simple switch

    Demo 2:
    * Relay that is toggled by an Arduino

    Code for today's project is found here.

    Hosts: Fr. Robert Ballecer, SJ and Bryan Burnett

    Connect with us!

    • Don't forget to check out our large library of projects at https://twit.tv/shows/know-how.
    • Join our Google+ Community.
    • Tweet at us at @PadreSJ, @Cranky_Hippo, and @Anelf3.

    Thanks to CacheFly for the bandwidth for this show.

    35 min
  • KH 280: Synology 1515+, Raspi, and Feedback

    We go to the KnowHow community and answer your questions! Time to upgrade you NAS? What is the Raspberry Pi compute module and why would you want it. What's the best way to exhaust hot air, and more!


    Synology NAS Question
    -- Alex Martinez
    "Im thinking of getting a synology ds1515+ but im debating if i should wait a bit that maybe its about time synology will release a newer model? Should i just buy or wait a bit?"

    1515+ Specs:
    * 5 Hot-swap bays (maximum of 10TB each)
    * Supports SSD Caching on Bay 1 (Install an SSD into bay 1 and the rest of the array is cached onto it)
    * Quad-core 2.4Ghz Intel Atom CPU
    * 2GB of DDR3 (Expandable to 6GB) (One empty slot)
    * Dedicated HARDWARE encryption engine
    * 4 GigE ports with failover and link aggregation (bonding)
    * Scalable with up to 2 expansion units (through the eSATA port)
    * 4x USB 3.0 ports on the back
    * 2 eSATA Ports

    * 450.77MB/s read /// 395MB/s Write
    (NB: That's 3.6GBps read // 3.16Gbps write :: That means it's FASTER than a single GigE interface can handle. You'll be WASTING that speed unless you got a switch/computer than can bind multiple GigE pipes OR if you're in a workgroup w/multiple computers accessing the NAS as the same time)

    * Dedicated HARDWARE encryption engine (Drops throughput to 448/191)
    * Supports wireless dongle support (to act as AP)


    Fan Direction
    -- Dennis Millican
    "I am building a LED array of 3W LEDs mounted on a .25 inch aluminum plate for a grow light. To cool it, I plan to mount a couple of fans on the back side. My question is should I mount the fans to blow cool air toward the aluminum or to exhaust warm air away from the LEDs? I am leaning toward blowing cool air toward the aluminum plate."

    * This is an issue that system builders have been playing with for decades
    * Should I blow air INTO the case, or suck it out?
    * We've more or less agreed that it's always good to have BOTH positive and negative pressure

    NB:
    * In an "OPEN" system, it's better to blow air over the heat diffusion surface
    * In a "CLOSED" system, you could get away with using it as an exhaust fan ASSUMING that the incoming air will flow over the heat diffusion surface

    Hosts: Fr. Robert Ballecer, SJ and Bryan Burnett

    Connect with us!

    • Don't forget to check out our large library of projects at https://twit.tv/shows/know-how.
    • Join our Google+ Community.
    • Tweet at us at @PadreSJ, @Cranky_Hippo, and @Anelf3.

    Thanks to CacheFly for the bandwidth for this show.

    56 min
  • KH 279: The Growduino - Part 1

    If you grow plants indoors, at some point you'll be faced with the choice of going on vacation and letting your plants die, or becoming a shut-in. You COULD purchase an automated drip-watering system, but if you've got even a little maker knowledge, you can make yourself a low-cost, super-flexible automated watering system.

    Adafruit 1/2" Water Solenoid Valve ~$8

    • Normally closed valve (Requires 12v to open the valve)
    • Minimum pressure of 3PSI
    • Liquid can only flow in one direction (marked on the casing)

    Live Demo:

    • We're going to install a solenoid valve into the bottom of a 5-gallon bucket

    Parts:

    1. 5 Gallon Bucket
    2. Adafruit 1/2" Solenoid
    3. 3/4" - 1/2" Bulkhead Fitting
    4. Teflon Tape

    Tools

    1. Drill (3/4" or Dremel)
    2. Sealant

    3D Printed Files

    • Interior and Exterior Sealing plates

    Claber 8053 Oasis 4-Program/20 Plant Garden Automatic Drip Watering System ~$94

    • Gravity fed dripper with a timer
    • Opens the valves twice a day
      • How long it opens the valves depends on the setting

    uxcell HH54P D 12V Coil Relay ~$8

    • Relays are electromagnetically controlled switches
    • Most use the same design: a higher power/current circuit can be thrown by a lower power/current circuit
      • They can be normally open or normally close, some, like the UXCELL can throw multiple circuits simul

    Uxcell 12V 5-pin Mini Power Relay ~$7

    Hosts: Fr. Robert Ballecer, SJ and Bryan Burnett

    Connect with us!

    • Don't forget to check out our large library of projects at https://twit.tv/shows/know-how.
    • Join our Google+ Community.
    • Tweet at us at @PadreSJ, @Cranky_Hippo, and @Anelf3.

    Thanks to CacheFly for the bandwidth for this show.

    48 min
  • KH 278: CES 2017 Gadget Roundup

    Back from CES we look at easy home automation with the Switchmate, big sound from very tiny titanium ear buds from Echobox, our favorite durable speaker from Fugoo, and a cure for motion sickness with the Reliefband.

    Hosts: Fr. Robert Ballecer, SJ and Bryan Burnett

    Connect with us!

    • Don't forget to check out our large library of projects at https://twit.tv/shows/know-how.
    • Join our Google+ Community.
    • Tweet at us at @PadreSJ, @Cranky_Hippo, and @Anelf3.

    Thanks to CacheFly for the bandwidth for this show.

    1 hr
  • KH 277: Intro to Oscilloscope Kit with Smitty

    We start our build of the Digital Oscilloscope Kit, and Smitty helps us with soldering tips and explains how resistors, capacitors, diodes, and more work!

    JYE Tech DSO138 DIY Digital Oscilloscope Kit SMD Soldered

    Here's the Manual

    YouTube: Smitty Working on SOMETHING

    Zeny 2in1 SMD Soldering Rework Station Hot Air & Iron 852D+ ESD PLCC BGA w/ Stand 4 Nozzle 5 Tip

    Hosts: Fr. Robert Ballecer, SJ and Bryan Burnett

    Guest: Mark Smith

    Connect with us!

    • Don't forget to check out our large library of projects at https://twit.tv/shows/know-how.
    • Join our Google+ Community.
    • Tweet at us at @PadreSJ, @Cranky_Hippo, and @Anelf3.

    Thanks to CacheFly for the bandwidth for this show.

    1 hr 12 min
  • KH 276: CES 2017

    Padre and Bryan go to CES 2017 and find the best new tech and how it works!

    • Razer Blade Stealth
    • LG OLED TV
    • Fugoo Speakers
    • Lecia Geosystems
    • Rohinni
    • Bosch Robotics
    • Ford Autonomous Vehicle

    Hosts: Fr. Robert Ballecer, SJ and Bryan Burnett

    Connect with us!

    • Don't forget to check out our large library of projects at https://twit.tv/shows/know-how.
    • Join our Google+ Community.
    • Tweet at us at @PadreSJ, @Cranky_Hippo, and @Anelf3.

    Thanks to CacheFly for the bandwidth for this show.

    46 min
  • KH 275: 2017 CES Preview

    The Acer Swift 7 is a super thin laptop great for traveling, the OnePlus 3t is a big improvement, and we report back from CES 2017!

    Hosts: Fr. Robert Ballecer, SJ and Bryan Burnett

    Connect with us!

    • Don't forget to check out our large library of projects at https://twit.tv/shows/know-how.
    • Join our Google+ Community.
    • Tweet at us at @PadreSJ, @Cranky_Hippo, and @Anelf3.

    Thanks to CacheFly for the bandwidth for this show.

    41 min

About Know How... (Audio)

From the publisher's feed

Get your gaming on! Jason Howell and Ars Technica's Sam Machkovech bring you 12 episodes and cover it all, from tips and tricks, consoles, gaming rigs, controllers, Virtual Reality, classic gaming, live gameplay, mobile gaming, console hacking, and more! Plus, they'll wrap up with a holiday game guide.

More shows like Know How... (Audio)

This Week in YouTube (Audio) by TWiT

This Week in YouTube (Audio)

9 Listeners

Trey's Variety Hour (Video) by TWiT

Trey's Variety Hour (Video)

34 Listeners

This Week in Law (Audio) by TWiT

This Week in Law (Audio)

109 Listeners

This Week in Law (Video) by TWiT

This Week in Law (Video)

6 Listeners

The Giz Wiz (Audio) by Dick DeBartolo & Chad Johnson

The Giz Wiz (Audio)

139 Listeners

The Giz Wiz (HD Video) by Dick DeBartolo & Chad Johnson

The Giz Wiz (HD Video)

29 Listeners

Dr. Kiki's Science Hour (Audio) by TWiT

Dr. Kiki's Science Hour (Audio)

96 Listeners

Maxwell's House (Audio) by TWiT

Maxwell's House (Audio)

35 Listeners

Jumping Monkeys (Audio) by TWiT

Jumping Monkeys (Audio)

72 Listeners

Ham Nation by Josh Nass

Ham Nation

116 Listeners

This Week in Enterprise Tech (Audio) by TWiT

This Week in Enterprise Tech (Audio)

94 Listeners

net@night (Video) by TWiT

net@night (Video)

24 Listeners

The New Screen Savers (Audio) by TWiT

The New Screen Savers (Audio)

50 Listeners

Coding 101 (Audio) by TWiT

Coding 101 (Audio)

15 Listeners

Futures in Biotech (Video) by TWiT

Futures in Biotech (Video)

10 Listeners

Padre's Corner (Video) by TWiT

Padre's Corner (Video)

9 Listeners

FourCast (Audio) by TWiT

FourCast (Audio)

0 Listeners

Ask The Tech Guy (Audio) by TWiT

Ask The Tech Guy (Audio)

28 Listeners

Hands-On Photography (Audio) by TWiT

Hands-On Photography (Audio)

31 Listeners

Ask The Tech Guy (Video) by TWiT

Ask The Tech Guy (Video)

0 Listeners