HVAC School - For Techs, By Techs

Horizontal Scroll Compressors w/ Trevor


Listen Later

In today’s podcast, Trevor Matthews from Emerson talks about horizontal scroll compressors. Throughout the podcast, we refer to Bulletin AE4-1338 (R3). You can find that bulletin HERE.

Horizontal scroll compressors are common in mobile applications, like buses and trains. They’re shorter in height than other compressors, so they fit into tighter spaces and are ideal for transport refrigeration.

Scroll compressors are particularly susceptible to overheating, and you need some controls to protect your compressor from damage. To prevent overheating, scroll compressors require pressure relief controls. You can typically use an OEM high-pressure control to protect the system. A low-pressure cutout installed in the suction line can help prevent TXV failure and a wide range of restrictions.

Accumulators are especially important for horizontal scrolls in heat-pump applications. However, accumulators have a fine mesh screen that can become clogged easily. So, we highly recommend replacing your accumulator in the case of burnout, not reusing it.

Refrigerant migration prevention is a little more complicated than in refrigeration systems with other compressors. You can use a crankcase heater, but you may also need a check valve in the discharge line and a liquid line solenoid valve. We don’t use pump down cycles for refrigerant migration; we use them to prevent the gas from moving backward and reversing the scroll.

When commissioning a three-phase compressor, you need to put your gauges on before starting the system up. You may also consider using a phase rotation monitor to make sure the scroll compressor is rotating in the correct direction (usually clockwise but not always).

Trevor and Bryan also discuss:

  • Variable-speed horizontal scrolls (ZRH vs. ZBH models)
  • Superheat requirements
  • Floodback and slugging
  • Starting and running
  • Extreme discharge line temperatures
  • Arcing fusite under vacuum
  • Functional checks
  • Pressure drop in the suction line
  • Operation envelopes
  • Pressure control set points
 

Check out Emerson for more information.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

...more
View all episodesView all episodes
Download on the App Store

HVAC School - For Techs, By TechsBy Bryan Orr

  • 4.9
  • 4.9
  • 4.9
  • 4.9
  • 4.9

4.9

985 ratings


More shows like HVAC School - For Techs, By Techs

View all
The Ramsey Show by Ramsey Network

The Ramsey Show

38,690 Listeners

The EntreLeadership Podcast by Ramsey Network

The EntreLeadership Podcast

4,333 Listeners

The Contractor Fight with Tom Reber by Tom Reber

The Contractor Fight with Tom Reber

408 Listeners

The Fine Homebuilding Podcast by Fine Homebuilding Magazine

The Fine Homebuilding Podcast

770 Listeners

Zack's Shop Talk by Zack Psioda

Zack's Shop Talk

151 Listeners

Building HVAC Science by Bill Spohn

Building HVAC Science

71 Listeners

The Home Service Expert Podcast by Tommy Mello: $200 Million Founder|Forbes, Inc., Entrepreneur Columnist

The Home Service Expert Podcast

724 Listeners

HVAC Know It All Podcast by Gary McCreadie

HVAC Know It All Podcast

208 Listeners

Hvac Uncensored by Gil Cavey

Hvac Uncensored

112 Listeners

HVAC Tech Tips by CE

HVAC Tech Tips

16 Listeners

AC Service Tech Answers Podcast by Craig Migliaccio

AC Service Tech Answers Podcast

89 Listeners

Waste No Day: A Home Services Motivational Podcast by Brian Burton & Nate Minnich

Waste No Day: A Home Services Motivational Podcast

468 Listeners

The Build Show Podcast by Matt Risinger

The Build Show Podcast

359 Listeners

The Refrigeration Mentor Podcast by Trevor Matthews

The Refrigeration Mentor Podcast

29 Listeners

Did You Know?-The ESCO HVAC Podcast by ESCO Institute

Did You Know?-The ESCO HVAC Podcast

6 Listeners