HVAC School - For Techs, By Techs

Non-bleed TXVs and Hard Starts - Short #257


Listen Later

In this short podcast episode, Bryan talks about non-bleed TXVs and whether they need hard starts.

A non-bleed (hard shutoff) TXV is a metering device that shuts off during the off cycle; it closes shut when there is no superheat. This strategy prevents refrigerant migration, especially in cases where we have long line sets. Liquid refrigerant stays in the condenser and is kept out of the evaporator, suction line, and compressor crankcase.

When we have a non-bleed TXV, the compressor may have a hard time starting under the conditions created by the hard shutoff TXV (high head pressure, low suction pressure). Reciprocating compressors are more likely to have this problem than a scroll or rotary compressor. If you have a short line set, 230+ voltage, and a scroll compressor, you probably won't need a hard start kit. You may need a hard start kit if you have a reciprocating compressor, a longer line set, or 208V power.

The OEM will recommend a hard start kit that is suitable for the equipment. Aftermarket hard start kits are okay if a compressor is old and struggling, but they're not the preferred option and should be as close to the OEM's recommendation as possible. Hard start kits typically consist of a start capacitor and a potential relay. Positive-temperature coefficient resistors (PTCRs) also exist, and these have a resistor that heats up and eventually takes them out of the circuit. Hard start kits should not be added to inverter-driven equipment and are not meant to compensate for voltage drop issues; they can cause more harm than good if they're used when they're not necessary or not used correctly.

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 7th Annual HVACR Training Symposium at https://hvacrschool.com/symposium.

Subscribe to our podcast on your iPhone or Android.

Subscribe to our YouTube channel.

Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android

...more
View all episodesView all episodes
Download on the App Store

HVAC School - For Techs, By TechsBy Bryan Orr

  • 4.9
  • 4.9
  • 4.9
  • 4.9
  • 4.9

4.9

1,003 ratings


More shows like HVAC School - For Techs, By Techs

View all
The Joe Rogan Experience by Joe Rogan

The Joe Rogan Experience

228,763 Listeners

Jocko Podcast by Jocko DEFCOR Network

Jocko Podcast

30,830 Listeners

HVAC Shop Talk by Zack Psioda

HVAC Shop Talk

151 Listeners

Building HVAC Science by Bill Spohn

Building HVAC Science

75 Listeners

HVAC Know It All Podcast by Gary McCreadie

HVAC Know It All Podcast

210 Listeners

Hvac Uncensored by Gil Cavey

Hvac Uncensored

111 Listeners

The Home Service Expert Podcast by Tommy Mello: $200 Million Founder|Forbes, Inc., Entrepreneur Columnist

The Home Service Expert Podcast

728 Listeners

HVAC Tech Tips by CE

HVAC Tech Tips

16 Listeners

The Shawn Ryan Show by Shawn Ryan

The Shawn Ryan Show

45,763 Listeners

AC Service Tech Answers Podcast by Craig Migliaccio

AC Service Tech Answers Podcast

87 Listeners

Advanced Refrigeration Podcast by Brett Wetzel & Kevin Compass

Advanced Refrigeration Podcast

85 Listeners

HVAC TV by Tony Mormino, HVAC Marketing Director, Engineer, and Your Humble Host

HVAC TV

16 Listeners

The Tucker Carlson Show by Tucker Carlson Network

The Tucker Carlson Show

16,983 Listeners

The Refrigeration Mentor Podcast by Trevor Matthews

The Refrigeration Mentor Podcast

31 Listeners

Did You Know?-The ESCO HVAC Podcast by ESCO Institute

Did You Know?-The ESCO HVAC Podcast

6 Listeners